20 Most Recent 1995 Chrysler Sebring Questions & Answers

we done one here not so long ago a big V6 petrol one ,well the hoppo done it not me ,now please dont quote me on this but i seem to remember looking and telling him to drop the AC pump .Now please dont quote me on any of this as i have the memory of a goldfish of late this comes with old dinasaur age or so iam told -till they need some carbs tuning or a dizzy fitting ,

Only fix is to pull the transmission and remove the torque converter and replace the faulty seal

Yes. I don't know why, but all the front wheel drive Chrysler transmissions make that same noise. It is not harmful to the transmisson.

A 1995 Sebring does NOT have an ODB 2 jack, you TWIT!!!!Its an ODB1.

Possible Bad crank sensor, bad distributor, or broken timing belt.

Usually weak thermostat would be cause. don-ohio

There's a computer controlled circuit that will kill fuel pressure on some cars right at the last inlet valve at the fuel rail.A bad key or ignition can cause this. don-ohio

If indeed there's no spark or fuel, first rule out the easy fixes: be sure there's gas in the tank; if there is, see if it's getting to the fuel injectors.
If the battery is charged, does the motor turn over when your turn the ignition key?
There is a long list of causes for what appears to be two problems occurring in tandem. I'd strongly suggest to take your vehicle to a reputable mechanic and save yourself loads of time, frustration, and probably $$$.
Best of luck!

Give some more details of the problem.

The battery should be on the right hand side of the car, in the engine compartment, remember when you jump start it to hook up the jumper cables like this; negative jumper cable to negative battery terminal on your car, then positive jumper cable to positive terminal on your car, then, put the other positive jumper cable to the car that's jumper car and last connect the other negative jumper cable to the jumer cars engine block, and that should help you.

switch bad--replace

dont try it yourself. Use only dealer parts, some of these have an updated tensioner. replace the belt, tensioner, and the water pump. if the belt breaks, valves will be bent, and the engine trashed. i'm not trying to scare you, just the facts.