1993 Chrysler Concorde - Answered Questions & Fixed issues

sounds like you have a problem with your alarm system. likely the ignition switch is the problem.

Fuel? Spark? If yes, time to see a technician

As you can see by the pictures it could be in large different number of places

Depends. If you buy the axle at a parts store the average price is $60. To have a shop do the repair and include the axle I would expect around $300 depending on where you live.

If all you are doing is changing to a side post battery, just connect all the positive cables from the old pos post to the new pos holder and all the neg ones to the new neg holder. If you've already cut them all off and not sure where each wire goes, all the reds are positive, all the blacks are neg. To make sure use your continuity meter to test. Connect one meter lead to any good clean metal part on the car and test between each black wire in turn, the neg ones will show a circuit, the pos ones will not.

If you are asking about turning over the engine with the Starter you will eventually overheat the Starter causing it to be replaced.

You have two problems, 1. the cv joint and probably a worn out steering rod link.

Check your fuses.The fuse diagram is on the back of the fuse panel cover.

Go to Auto Zone,sign up free and put your vehicle in the list for your garage.Look up repairs for your vehicle on there site,they have great help and also trouble shooting videos that will not doubt solve your issues.The temperature control panel on your Chrysler Concorde controls the fan ... Open the fuse panel under the steering column and pull out the fuse for the radio

go up and over

battery is probably old

Radiators on automatics have a separate reservoir for transm. fluid cooling purposes. Didn't you remove the transm. fluid cooling lines from the radiator-a feed line to the radiator and a return line from radiator to the transmission? They are small steel lines that connect on the end of the radiator.

YOU HAVE TO REMOVE POSITIVE BATTERY CABLE FROM STARTER SOLENOID.REMOVE THE NUT HOLDING POSITIVE BATTERY CABLE TO SOLENOID.THEN MOVE CABLE FROM SOLENOID.THEN DROP THE STARTER FROM ENGINE.

What is the ******??

abs light means anti lock brake system and the light is telling you that they aren't working properly. you still have brakes it just won't be with the anti lock system your vehicle has. you will need to have your brake system checked out.

At this point the vehicle needs to be scanned for trouble codes to determine what area to look for a problem.

For Automatic transmission problem,click the link below:---- Automatic transmission troubleshooting:----

http://howtobyme.blogspot.com/2011/11/automatic-transmission-will-not-go-into.html

--------- Automatic transmission shift lever issues?-------

http://technoanswers.blogspot.com/2012/01/automatic-transmission-shift-lever-hard.html

----------- AUTOMATIC TRANSMISSION FLUID LEVEL? --

http://schematicsdiagram.blogspot.com/2011/07/how-to-check-automatic-transmission.html

--------------

AUTOMATIC TRANSMISSION FLUID AND FILTER?

http://schematicsdiagram.blogspot.com/2011/07/how-to-change-automatic-transmission.html

----------- Transmission fault light on car dash?

http://schematicsdiagram.blogspot.com/2011/12/transmission-fault-light-on-car-dash.html

-------- Transmission shifting problem?

http://schematicsdiagram.blogspot.com/2012/01/transmission-shifting-problem-on-toyota.html

-------- Transmission Slips out of 2nd gear?

http://repairhelpcenter.blogspot.in/2012/02/transmission-slips-out-of-2nd-gear.html

----------- OD light flashing and transmission fluid leaking?

http://repairhelpcenter.blogspot.in/2012/02/od-light-flashing-and-transmission.html

---------- Why Transmission fluid leaks near radiator?

http://repairhelpcenter.blogspot.in/2012/02/transmission-fluid-leaks-near-radiator.html

---------- Transmission fluid leaking?

http://technoanswers.blogspot.in/2012/02/ford-windstar-transmission-fluid.html

------------- ****** wont go in reverse?

http://technoanswers.blogspot.in/2012/02/dodge-neon-wont-go-in-reverse.html

------------- Automatic transmission will not go into reverse?

http://technoanswers.blogspot.in/2012/02/dodge-automatic-transmission-will-not.html

---------- Transmission is making buzzing noise?

http://technoanswers.blogspot.in/2012/02/transmission-is-making-buzzing-noise.html

-----------

This will help.

Thanks.

Check for a vacuum leak at intake manifold either a hose or line busted or maybe the intake gaskets are leaking.

When this warniing light usually comes on, means that you have a failed wheel speed sensor but these vehicles are common for the ABS module to fail causing the same problem. You can back probe the wires comming out of each wheel speed sensor with the wheel lifted in the air and check for ac voltage as you spin the wheel.What ever sensor does not put out voltage needs to be replaced if they all seeem to work it is likely the ABS module. But before you replace any parts you would want to have the ABS module checked for codes at one of your local shops that has a high end scantool that can access those codes. If some job was make there, I suggest re-check harnesses connections and right tight.Hope this helps and just keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.Thank you for using FixYa.

HAZARD FLASHER RELAY LOCATED ON THE LEFT SIDE OF THE PASSENGER COMPARTMENT BETWEEN THE JUNCTION BLOCK AND THE BRAKE PEDAL.