20 Most Recent
2005 Subaru Outback - Page 5 Questions & Answers
Clutch slipping on 20005 subaru outback
Do you have any free play in your clutch pedal? The pedal should move at least 1" before you feel resistance. If you have free play then you probably have a clutch going bad. If there is no free play then you need a clutch adjustment.
Need a stereo color code diagram for 2005 subaru
Check this information about 2005 Subaru Outback Wagon Car Stereo Wire Guide:
Car Radio Battery Constant 12v+ Wire: Blue/Yellow
Car Radio Accessory Switched 12v+ Wire: Yellow/Red
Car Radio Ground Wire: Black
Car Radio Illumination Wire: Green
Car Stereo Dimmer Wire: N/A
Car Stereo Antenna Trigger: N/A
Car Stereo Amp Trigger Wire: N/A
Car Stereo Amplifier Location: N/A
Car Audio Front Speakers Size: N/A
Car Audio Front Speakers Location: N/A
Left Front Speaker Positive Wire (+): Brown/White
Left Front Speaker Negative Wire (-): Green/Black
Right Front Speaker Positive Wire (+): Red/Yellow
Right Front Speaker Negative Wire (-): White/Black
Car Audio Rear Speakers Size: N/A
Car Audio Rear Speakers Location: N/A
Left Rear Speaker Positive Wire (+): White/Red
Left Rear Speaker Negative Wire (-): Red/Green
Right Rear Speaker Positive Wire (+): Blue/Green
The 2005 Subaru Outback Wagon radio wire color information above is updated as it is submitted by the Modified Life community.
Hope helps (remeber to rated ans leave an testimoanial about this free answer).
My 2005 subaru legacy outback
loose bolts somewhere in the front end? you have had lots of work done there.
wheel weights can fall off or a rim can be difficult to balance?
Cd's stuck in 6-stacker
If the CD magazine does no release then it is needed to remove the player and open the mechanism to remove the struck up cd or mechanism.
Now is is possible that some CD can warp over a period of time or it can also get caught up in the transfer mechanism. Also if the loading mechanism had encountered a fault it can jam the system, so after removing the cover you can assist the cd to eject out with manual leverage of the motor and mechanical linkages. If not there is fault in the drive of the loading motor.
Not finding what you are looking for?