20 Most Recent
1995 Isuzu Rodeo - Page 4 Questions & Answers
Tappet valve noise
It needs a valve adjustment or a complete valve job a mechanic can tell. (I had a 94 same noise, traded it in!)
Parking brake squeeling
its dangerous get it fixed now.
i cant guess, no body can but
its brakes or bearings. both serious.
or even road debris hit the parts there and they are bent (LOOK see)
my wild guess, brakes.
get it serviced or learn to do the inspections, 2 choices.
Spark plug firing order
Hello Harvey, My information shows firing order of 123456. #1 being passenger's front cylinder and #2 being driver's front cylinder.
Flasher repair
First, check your bulbs by starting up the vehicle and turning on the blinkers, then go around to check them. Also check to see if your emergency flasher work.
The fuses are either behind the glove box or under the dash on the driver's side.
Look on fixya, someone had the same problem back in April and several ideas were posted.
Good luck!
Starter location
first of all disconnect the battery , it is easier to get to from under the vehicle so if you jack up and support vehicle it makes it easier to get to . if you were to be standing at the front of the car with the hood open looking in the engine bay it is on the left hand side of the engine , its hard to see looking down as the inlet manifold is in the way of a clear view but from under neigth it can be clearly seen .follow the gear box up to where the bell housing is bolted to the engine and it should be easilly seen as the bolts that attach the starter are usually one 8mm bolt with a 14mm head and the other is a 8mm nut with a split washer making it alittle easier to locate correctly when replacing. disconnect the two power wires that attach to the solinoid (already having disconnected the battery negative terminal from the battery above so there is no chance of shorting out) after the wires have been undone and put aside a 14mm socket and extension is usually the go to remove the retaining bolt and nut. fitting of the starter is the same but in the reverse order. not a hard job on the 4ze1 at all but alittle bit pressed for room to see without going from under neith the vehicle
Not finding what you are looking for?