20 Most Recent 2000 Chrysler Sebring - Page 8 Questions & Answers

0answers
0helpful
1answer
0helpful
1answer

Why does oil blowout to fill cap

All engines have what's called "blow by". It I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa
2/27/2012 3:07:51 AM • 2000 Chrysler... • Answered on Feb 27, 2012
0helpful
1answer

2000 chrysler sebring pvc valve location

The PCV should be sticking out of the passenger side of the front valve cover. Let me know if you have any questions and I'll do my best to answer them. Thank you for using FixYa.com! I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa
2/26/2012 3:57:20 AM • 2000 Chrysler... • Answered on Feb 26, 2012
0helpful
1answer

Coolant bypass hose leaking

Replace it then
2/25/2012 10:40:20 PM • 2000 Chrysler... • Answered on Feb 25, 2012
0helpful
1answer

2000 chrysler sebring anti lock system lock up

This problem is caused by a leaking hydraulic pressure valve in the Active ABS system you van is equipped with. The ABS produces its own pressure and can apply the brakes with no brake pedal input from the driver, so the system has pressure always, if the valve that supplies brake pressure doesn't seal the brakes can lock up. You must most likely replace the ABS hydraulic control module under the hood to correct this. They sell them as rebuilt units at parts stores like Napa and Carquest.
2/16/2012 12:37:06 AM • 2000 Chrysler... • Answered on Feb 16, 2012
0helpful
1answer

My 2000 sebring will stall and not restart while

The searing stalls and will not start right.This can be cause by low fuel pressure problem or bad timing belt or problem with ECM(the cars computer) it self.Also if you notice that check engine light is coming on and remaining steady ON,then get the car scanned to retrieve the error codes.That error code will point towards the fault causing this problem. Click this link for more troubleshooting:--- http://technoanswers.blogspot.com/2011/10/why-car-stalls-while-driving.html ---------- This should help.Thanks.Helpmech.
10/19/2011 8:35:44 PM • 2000 Chrysler... • Answered on Oct 19, 2011
0helpful
1answer

My sebring stalls and will not start back up

The searing stalls and will not start right.This can be cause by low fuel pressure problem or bad timing belt or problem with ECM(the cars computer) it self. Click this link for more troubleshooting:--- http://technoanswers.blogspot.com/2011/10/why-car-stalls-while-driving.html ---------- This should help.Thanks.Helpmech.
10/19/2011 8:33:13 PM • 2000 Chrysler... • Answered on Oct 19, 2011
0helpful
1answer

Can you re-attache the defrost wire on rear

Possibly. The aftermarket does have a paintable product to repair the in-glass wires but I'm not sure how much it will do. A visit to your local auto parts store to make inquiries should be in order. It may prove helpful. Hope this helps.
9/27/2011 1:06:36 PM • 2000 Chrysler... • Answered on Sep 27, 2011
Not finding what you are looking for?
2000 Chrysler Sebring Logo

588 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Sebring Chrysler

  • Sebring Chrysler

Most Popular Question

computer shutting down fuel injectors

  • Cars & Trucks
Loading...