20 Most Recent 1999 Isuzu Trooper - Page 7 Questions & Answers

0helpful
1answer

Settings on engine

WHAT SETTINGS DO YOU NEED TO KNOW WHEN CHANGING THE FLY WHEEL IS IT TORQUE OR ALLIGNMENT
2/13/2013 5:47:43 AM • 1999 Isuzu... • Answered on Feb 13, 2013
0helpful
1answer

Check ligth braek and battery ligth

If you can,go to Autozone,they will test your battery and alternator for free,only takes a few minutes,on your brake light,check brake fluid in master cylinder could be low, setting the sensor off.If your brake fluid runs dry,you will have to bleed,you may have a brake leak and check your brake pad and shoes,may need replacing.
12/24/2012 10:39:06 PM • 1999 Isuzu... • Answered on Dec 24, 2012
0helpful
1answer

Flashing check engine light

Depending on the nature of the problem, the Check Engine Light may come on and go off, remain on continuously or flash. Some intermittent problems will make----------------------------------------------------------------------------------------Rotunda Dealer IDS
12/20/2012 2:46:04 AM • 1999 Isuzu... • Answered on Dec 20, 2012
0helpful
1answer

1993 Isuzu Bighorn battery,what size do I need

What's in there now?Ask what your choices are at the autoparts store
12/12/2012 12:21:41 AM • 1999 Isuzu... • Answered on Dec 12, 2012
0helpful
1answer

Where is the thermostat located on a 1999 isuzu trooper

In between radiator&cyender head (upper hose pipe)
12/11/2012 7:53:05 AM • 1999 Isuzu... • Answered on Dec 11, 2012
0helpful
2answers

Check engine light flashes on acceleration

HelloWhen the service engine soon light a yellow light (Also called the check engine light or engine management light) is turned on this is to alert you to the fact that Powertrain Control Module (computer) has detected a failure somewhere in the systems it controls you may not feel any difference in the way the engine runs, this can be the transmission or the engine or emission system, there are fault codes set in the modules memory for these faults. What needs to happen now is to have the powertrain control module scanned with a special tool called an OBD2 electronic engine control scanner or a OBD2 code reader. Once the code(s) are read then you must perform the diagnostics for each code and make the appropriate repairs based on the findings of the diagnosis that was performed, this is called doing "Pinpoint" testing.

12/10/2012 2:47:49 AM • 1999 Isuzu... • Answered on Dec 10, 2012
0helpful
1answer

Cable will not release hood from inside on a 1995 Isuzu Trooper. Can hood be released from outside at grill ?

sounds like you need to replace the cable
11/27/2012 11:57:41 PM • 1999 Isuzu... • Answered on Nov 27, 2012
0helpful
1answer

How to tell if the starter is going out

Hesitation and slow starting.
11/25/2012 4:21:49 AM • 1999 Isuzu... • Answered on Nov 25, 2012
0helpful
1answer

I cant find the cam shaft sensor

it is the crank position sensor you need.
11/9/2012 11:46:59 PM • 1999 Isuzu... • Answered on Nov 09, 2012
0helpful
1answer

Trooper has power wont start

Check the wire to the starter solenoid. It maybe broken or termination is loose.
10/29/2012 1:30:13 AM • 1999 Isuzu... • Answered on Oct 29, 2012
0helpful
1answer

Power drain and relays

suspect a blown or faulty diode in the alternator but i could be wrong as without a good look and play with the multimeter i couldnt tell you
9/24/2012 9:18:50 PM • 1999 Isuzu... • Answered on Sep 24, 2012
Not finding what you are looking for?

694 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Isuzu Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Trooper Isuzu

  • Trooper Isuzu

Most Popular Question

isuzu 320 v6 camshaft timing diagram

  • Cars & Trucks
Loading...