20 Most Recent 1992 Isuzu Rodeo - Page 6 Questions & Answers

0helpful
1answer

Where is the flasher relay?

On 1992 Isuzu Truck Rodeo the Flasher is located: Front seating area, driver side, under dash, mounted above kick panel.Hope this helps (remember to ratings this free answer and leave some testimonial comments).
10/8/2011 2:11:44 PM • 1992 Isuzu Rodeo • Answered on Oct 08, 2011
0helpful
1answer

Replaced the starter on my

i dont think the starter will spin until the bendix comes all the way out. Thats the way most are wired. you sure the flywheel is good. you sure the wires are on correctly? why did you replace it in the first place?
9/8/2011 10:12:11 PM • 1992 Isuzu Rodeo • Answered on Sep 08, 2011
0helpful
1answer

I have a 92 isuzu

could be a loose brake pad or caliper.
8/18/2011 12:31:54 AM • 1992 Isuzu Rodeo • Answered on Aug 18, 2011
0answers
0helpful
1answer

I have 1992 isuzu rodeo

it is the serpentine belt
7/21/2011 10:48:35 PM • 1992 Isuzu Rodeo • Answered on Jul 21, 2011
0answers
0answers
0answers
0helpful
1answer

I need to know what kind of fluid my clutch master

Normally brake fluis The book says DOT 3.
6/18/2011 5:56:56 AM • 1992 Isuzu Rodeo • Answered on Jun 18, 2011
0helpful
2answers

Fuel does not get to

Check power to injector wiring harness to make sure that your injectors are opening
5/19/2011 5:37:09 AM • 1992 Isuzu Rodeo • Answered on May 19, 2011
0helpful
1answer

Where I can buy the alternator mount the base that

junkyard
5/18/2011 3:27:20 AM • 1992 Isuzu Rodeo • Answered on May 18, 2011
0helpful
1answer

I have a 1992 izuzu

Check the caliper sliders, they may be seized causing limited brake pad contact. Also check the calipers for siezed pistons.
After bleeding the system, sometimes the proportioning valve will have to be reset manually. You can do this by having an assistant press the brake pedal and open a bleeder screw slightly on one side [ front or rear ] of the system, it may reset. If not, try doing the other side of the system.
If the brake pedal seems to be pushing back against you then either the Brake Booster isn't getting proper vacumn, or is faulty.
If the vehicle has drum rear brakes, make sure they are adjusted properly. If they are set too loose the pedal will feel spongy and low.
Hope this helps.
5/2/2011 12:16:26 PM • 1992 Isuzu Rodeo • Answered on May 02, 2011
0helpful
1answer

I installed a fuel filter, spark plug and wires

have u got plug wires crossed
3/15/2011 1:44:09 AM • 1992 Isuzu Rodeo • Answered on Mar 15, 2011
0helpful
1answer

Replacing the starter in my 1992 isuzu rodeo and

14mm 0r a 15mm
3/8/2011 4:15:45 PM • 1992 Isuzu Rodeo • Answered on Mar 08, 2011
Not finding what you are looking for?
1992 Isuzu Rodeo Logo

384 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2001 Isuzu Rodeo
2001 Isuzu Rodeo

832 Questions

1999 Isuzu Rodeo
1999 Isuzu Rodeo

814 Questions

2000 Isuzu Rodeo
2000 Isuzu Rodeo

819 Questions

1998 Isuzu Rodeo
1998 Isuzu Rodeo

720 Questions

1995 Isuzu Rodeo
1995 Isuzu Rodeo

623 Questions

Top Isuzu Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Rodeo Isuzu

  • Rodeo Isuzu

Most Popular Question

sudden power loss

  • Cars & Trucks
Loading...