20 Most Recent 2000 Chrysler 300M - Page 8 Questions & Answers

Sounds like your valve lifters. It's possible that they drained the oil and never refilled it. This does happen when they go on break or lunch half way through a job. They think they added the oil, but did not. Out you go, Mr. Clack-Clack.

Some of those models the fans turn off at a set speed . (35 mph or so) If the radiator is not in perfect condition the car can over heat. Just not enough cooling ability in the radiator.

If you never us it the cables will rust thus when you apply the brake then release it it wont release all the way.try holding the release and pulling the pedal up by hand while the release is pulled

If you email me i can send information that way sj196653@yahoo. Dont forget to rate my solution and leave testimonial it is how i earn my achievements Thanks in advance

Support engine and remove motor mount to reach starter.

Does it have a sunroof?

Do you have spark? Have you tried a couple of shots of carb spray into the intake while cranking the engine over? Have you checked to see if the timing belt is turning the cams? Have you checked for fuel pressure? Let me know what you find with the above questions. Let me know if you have any questions and I'll do my best to answer them. Thank you for using FixYa.com! I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa