2006 Cadillac DTS - Answered Questions & Fixed issues


On this website you find fuse box diagram and description for Cadillac DTS (2005 - 2007)


https://www.carknowledge.info/cadillac-dts-2005-2007-fuse-box-diagram

2006 Cadillac... | Answered on Apr 24, 2019 | 325 views


it's built into the transmission range selector

2006 Cadillac... | Answered on May 15, 2018 | 300 views


How long does it sit before trying to restart when it fails?

2006 Cadillac... | Answered on Jan 15, 2018 | 63 views


With all the electronic's on your vehicle this type problem is hard to diagnose. It would be better if it died an didn't start back up , then it could be diagnosed . Your vehicle has a number of electronic control module's , sensor's etc..... Plus the modules all share information on a serial data bus ,communication network . A loose connection ,a module not sending info. ,anything like this could bring down the data bus an cause it to die. I feel for you , the dealer shouldn't have just replaced part's like that if they were not sure . Problems like this can take a long time to pin down . Hooking up testing equipment , using a 8 channel lab scope to check electical signals to an from the PCM , BCM ,data bus. Could take a lot of diagnostic time . Did you buy the vehicle new ? Get the factory Rep. involved , engineers from cadillac etc. When i have a problem vehicle at the dealer that's what i do , call tech help line .

2006 Cadillac... | Answered on Nov 26, 2017 | 89 views


Sometimes the front suspension bushes will squeak when you hit bumps, and occasionally it will be a shock absorber. If this does not turn out to be the case, I would just take it to another dealer and ask them to look at it.

2006 Cadillac... | Answered on Nov 22, 2017 | 59 views


There is no power steering belt - the PS pump is driven by the serpentine belt on the passenger end of the engine.

2006 Cadillac... | Answered on Apr 17, 2017 | 93 views


ballast is located in each headlamp assembly.

2006 Cadillac... | Answered on Mar 18, 2017 | 208 views


One injector (#2) is not working properly causing misfires. This can be because the injector has failed, the ignition control model driver for that injector has failed, or there is a wiring problem between the module and the injector. Most frequently, it's the injector and you could start by replacing it, but it's complicated and if it were me, I'd take it to a GM dealer for diagnosis and repair.

2006 Cadillac... | Answered on Mar 07, 2017 | 76 views


Whatever fell off isn't a torsion bar - there isn't one. For help, describe the part better (a picture would help).

2006 Cadillac... | Answered on Jan 02, 2017 | 83 views


cigarette fuses not working ? fuse keeps blowing ? Could you elaborate a little ?

2006 Cadillac... | Answered on Nov 13, 2016 | 183 views


You talking about caddy dts park lamps. Did you check for voltage at proper fuses? You see the part lamp relay, correct?
Your owners manual may show fuse and relay application and location.

fuses-2006-dts-front-back-hosjjvp310ks0pxrhoabtzav-5-0.jpg

2006 Cadillac... | Answered on Nov 13, 2016 | 42 views


Ignition cylinder could of been worn and key no longer matches tumblers.

2006 Cadillac... | Answered on Nov 06, 2016 | 897 views


What is "withblock"? What exactly is the problem you are having? By the way, only a dealer can diagnose and reset/repair/reprogram the theft deterrent system.

2006 Cadillac... | Answered on Nov 02, 2016 | 98 views


The first thing you do is check the brake lights, do they work, if not you found your problem.

2006 Cadillac... | Answered on Oct 28, 2016 | 377 views


No not without re-engineering the system operating software

2006 Cadillac... | Answered on Oct 04, 2016 | 93 views


Check engine light on? Is idle speed OK, not slow?

2006 Cadillac... | Answered on Aug 31, 2016 | 179 views


Welcome to the Cadillac world. These are the second worst to work on when it comes to computers/wiring. Mercedes are the worst. Diagnostic time at my house is $300(tells you what is wrong). I refuse to do them at work, they don't charge enough and I get yelled at for taking to much time. Just take it to a dealer.

2006 Cadillac... | Answered on Jul 22, 2016 | 576 views


You have to take bumper cover off .
Remove rear bumper fascia. Refer to Rear Bumper Fascia Replacement . Disconnect electrical from the rear object sensor. Lift the locking tabs on the housing and remove the rear object sensor.
Preliminary Procedure
  1. Remove the compartment sill plate. Refer to Rear Compartment Sill Trim Plate Replacement .
  2. Remove rear wheel liners. Refer to Rear Wheelhouse Panel Liner Replacement .
1
Rear Fascia Push Pin Retainers (Qty: 2)
2
Rear Fascia Nuts (Qty: 4)
Tighten
10 N?·m (89 lb in)
3
Rear Fascia Bolts (Qty: 2)
4
Rear Fascia Bolts (Qty: 6)
5
Rear Fascia
Tip
?€¢
Energy absorber and fascia are removed together. Cannot be separate on vehicle.


?€¢
Disconnect the electrical connectors.

2006 Cadillac... | Answered on Dec 22, 2015 | 337 views

Not finding what you are looking for?
2006 Cadillac DTS Logo

471 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Cadillac Experts

Marvin
Marvin

Level 3 Expert

85108 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...