20 Most Recent 2006 Audi Q7 - Page 9 Questions & Answers

My best SUGGESTION would be to get your CODES read...
FREE at many "mechanics" and repair shops...
(( I would recommend an EXHAUST shop )).
When the SALES CLERK suggests you need to buy
OXYGEN SENSORS... rest assured that you likely
need a new MUFFLER or CATALYTIC converter...
OXYGEN sensors are like thermometers: they only REPORT the news...
Buying a new THERMOMETER because you have a FEVER just is not that bright an idea.
Then check out your PARTS prices on ROCKAUTO
BEFORE taking your car for "repair"
If you live in CALIFORNIA or a "CARB" requirement state... PAY particular attention to THOSE PARTS ONLY... else you will get caught up in having to replace those parts AGAIN
Happy hunting and good luck.
Cut and paste the link below
to get started (A4, 2.0 liter)
got to"

Audi Cars &... | Answered on May 01, 2019

Maybe trunk? Under hood or dash

Audi Cars &... | Answered on Apr 30, 2019

recommend you put new bolts
once used they will not have the same strength
after all the work you dont want to have to take it apart again
they may even break while you torque them
so put new ones

Audi Cars &... | Answered on Apr 29, 2019

As long as the radio is on the mic is the radio speakers. Just be sure the radio is on and it will work fine.

Audi Cars &... | Answered on Apr 22, 2019

Have you pulled the relays to see how wet the contact pins and plugs are? I would pull each one, blow out the recepticle with your compressor, then grease the plug really good with electrical corrosion grease.. same with your fuse panel if it's wet..

Audi Cars &... | Answered on Apr 22, 2019

I would suggest getting it to the closest transmission shop or Audi dealer as soon as possible. Any error message is not good and driving with an error message is never advised.

Audi Cars &... | Answered on Apr 15, 2019

you need to go to Autozone ,have them to connect their OBD2 to your computer port under the dash to pull the code which triggered the check engine light. the code will steer you in the right direction for making a repair. by the way this, is a free dianosis at any Autozone. or go to walmart and buy your own OBD2 from 20.00 and, up to the elite. Probably a camshaft Sensor or another sensor going bad.

Audi Cars &... | Answered on Apr 07, 2019

Some fixya user told me a website reliable-store it is very good.. I used it to repair my shredder it had some spark issue which wasn't easily fixed. you can go there and try

Audi Cars &... | Answered on Apr 03, 2019

There is TPMS (tyre pressure monitoring system)
they are inside every tyre. Which tell the car about your tyre pressure. If they have failed or you have recently changed tyres where sensors are not placed properly then light will come on and most likely car will stop, due to safety issue.


Audi Cars &... | Answered on Apr 03, 2019

if you can change it and you wish to change it
then do it.

Audi Cars &... | Answered on Apr 03, 2019

Loss of hydraulic fluid due to a leak is the likely cause. Defective hydraulic pump motor is another possibility

Audi Cars &... | Answered on Apr 03, 2019

Not finding what you are looking for?
2006 Audi Q7 Logo

82 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2009 Audi Q7
2009 Audi Q7

49 Questions

2011 Audi Q7
2011 Audi Q7

27 Questions

2007 Audi Q7 3.6
2007 Audi Q7 3.6

22 Questions

2007 Audi Q7 3.0
2007 Audi Q7 3.0

-10 Questions

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers


Level 3 Expert

84619 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Q7 Audi

  • Q7 Audi

Most Popular Question

keys stuck in ignition its in park 3

  • Cars & Trucks