20 Most Recent 2006 Buick Lucerne - Page 9 Questions & Answers

Remove air box & air tube loosen throttle body 2 clamps disconnect Hoses on pump area remove rear cover 4 10mm bolts from rear of pump disconnect two bolts on housing bottom then 4 bolts on center housing two more are on lower rear between eng & tranny the other two are front lower 8 total remove nut fuel line clamp disconnect Wiring move housing out pump area 2-3 inch disconnect tensioner & remove water pump 5 x 10 mm bolts install new pump & reassemble good look 2-3 hours

Have you checked battery to see if it has enough voltage?

check the condition of the gasket,and or the mating surface,where the filter seats itself.also add a little oil the seal on the filter when installing it.

there is a product they call fellers. it's 1 ft clamp on steel wires, that clamp onto your fenders near the wheels.