2003 Dodge Stratus - Answered Questions & Fixed issues
Where to put manual transaxle fluid on a 2003 dodge stratus coupe 2.4L SOHC
There is a small pipe threaded plug on the drivers side of the tranny about half way up the body and around the rear center from front to rear. When removed,fluid should flow from the hole(providing the vehicle is level on all axises), if not, fill to top of the hole with new gearoil or tranny fluid whichever is specified in your manual.
7/18/2021 4:11:40 PM •
2003 Dodge...
•
Answered
on Jul 18, 2021
•
38 views
2003 dodge startus r/t computer said the warm up catalyst was bad
I recently tried the DIY service and repair manuals from a website and it actually helped me repair transmission problem in my jcb 3cx site-master.
It would'nt move forward or reverse, engine was good both solenoids for forward and reverse worked, but still couldn't diagnose the problem.
I don't have much technical knowledge but I just followed it step-wise, and now it works perfect! covers wiring, codes, diagrams, torque specs, PCV, everything
got it from
www.reliable-store.com
3/22/2018 3:57:45 PM •
2003 Dodge...
•
Answered
on Mar 22, 2018
•
122 views
Remove heater core 2003 dodge stratus
This is a BIG job, requiring removal of the dashboard, discharging the a/c system, and removing the heater/airconditioning unit from the car (a big box with the evaporator, heater core, blower fan, and various doors that direct airflow). If you want to DIY, there are several videos on YouTube for similar models - you can view those to get an idea of what is involved.
11/10/2019 12:27:49 AM •
2003 Dodge...
•
Answered
on Nov 10, 2019
•
390 views
What parts do I need for purge flow fault on dodge stratus 2003
If this question is with regards to a fault code of P0441, the following applies.Basically this means that there is a problem in the EVAP system. The computer will command the purge control valve open and if it does not sense the right amount of vacuum then it will set this code.The purge valve is part of the EVAP system. The purpose of this system is to take all of the excess fuel vapor from the gas tank and store it until it can be burned in the engine. If it weren't for this system then all of those vapors would be vented into the atmosphere. Usual causes for this code:Faulty Purge Control SolenoidFaulty Purge Control ValveDamaged Wiring to the Purge SolenoidOther possible causes:Faulty ComputerRestriction in the EVAP SystemFaulty Vacuum Switch
10/29/2016 7:57:47 PM •
2003 Dodge...
•
Answered
on Oct 29, 2016
•
103 views
2003 dodge stratus cruise control not engaging
Catherine, Check your cruise control fuse as a first step. Could be a bad brake switch, faulty vacuum line, faulty multi function switch,etc., may have to have a good Tech. diagnose and estimate repair.
8/14/2016 12:29:30 AM •
2003 Dodge...
•
Answered
on Aug 14, 2016
•
539 views
HAZARDS LIGHT AND TURNING SIGNAL
You have a relay besides the fuses which controls both available at auto parts store. It is available at autozone for 28.00 have to order part number lm470
6/22/2016 1:50:02 AM •
2003 Dodge...
•
Answered
on Jun 22, 2016
•
62 views
Fuel pump has been changed but it will not start.
Search Results
www.cargurus.com > Questions > Dodge > Stratus
CarGurusJan 2, 2015 - Car cranks but wont start - I have a 97 Dodge stratus i bought just a few days ago. ... just cranks but wont actually start. Its not the battery or ... the relay for the fuel pump as well. What could be ... wont start. 2003 Dodge Stratus.
www.cargurus.com > Questions > Dodge > Stratus
CarGurusSep 7, 2013 - One day when I went to start my car it started up then as I went to reach ... anything to get it starting but he had thought it was the fuel pump but then it ... Ihave a 4 cyl 2.4l DOHC with 172,000 miles. Changed the oil on Sunday and on Tuesday it died while driving ... 2005 dodge stratus wont crank 1 answer.
www.allpar.com/fix/fuelpump.html
A fuel pump failure will usually set no engine codes and you may get no ... Sometimes the pump will give you warning signs that it is about to go but you may not notice ...times on the tank and turn key to start again and listening for the pump hum. .... been through and you'll feel better later knowing that it has been changed.
5/13/2016 3:18:50 AM •
2003 Dodge...
•
Answered
on May 13, 2016
•
1,064 views
How do I fix the heat
You have one of two problems. The heater core is plugged /
restricted or there is an inoperative internal blend door motor problem. Start the vehicle and let it reach operating temperature. Feel the hoses under the hood that go into the heater core. They should be close to the same temperature. If one is hot and the other luke warm/cold.... the heater core is plugged/restricted. If both hoses are near the same temperature, suspect a defective/non operational blend door motor that controls heat/cold/airflow attached to the heater box assembly
12/22/2015 12:13:36 AM •
2003 Dodge...
•
Answered
on Dec 22, 2015
•
459 views
Not finding what you are looking for?