20 Most Recent
2003 Nissan 350Z - Page 4 Questions & Answers
My 2003 350z shifter will
Did you try moving the wheel while you are shifting? Stepping on the brake? Button on the shifter? Most of these are safety switches, some are electric and they do wear out. But I think you might have the steering wheel twisted in there locking the shifter, try moving the wheel. Make sure foot is on brake and key is on. Hope this helps.
2003 350Z window problem
Most likely your window motor has failed due to dirt inside from normal
wear and tear during use, or overloading has burned it out. A second
possibility is that you need to reset the calibration on the motor that
tells it when to stop at the top and bottom (also necessary after
replacing a worn or burned out motor). Great service-manual-quality
info can be found
here (link is to the reset procedure). Door panel removal is
here. Window motor service info is
here and
here.
Car dieing at idle
try reading the codes if none found check the fuel line pressure it should read 55lbs on the injector fuel rail is a tyre valve looking thing you read the pressure from here with ordenary tyre valve gauge you know the one that pops out and you can the pressure .
WONT SMOG
wrong arrangement of piston rings affects intire performance of an engine. and must see that.have you calibrate your injection pump? and change your injectors?have a shop with scan-tool diagnose the problem.
How do you replace a Nissan 350Z knock sensor?
Hello
The knock sensors (one for each cylinder head on the V6) are located on the inside of the cylinder heads, in order to replace them the upper intake manifold must be removed. It is always recommended on this engine family that not only replace the 2 knock sensors but that you also replace the short sub wiring harness to the knock sensors from the main engine harness as it is many times the a common cause of the knock sensor code(s) in the 1st place.
Not finding what you are looking for?
