20 Most Recent 1996 Ford Windstar - Page 9 Questions & Answers

the eng. makes the vac . you have a bad vac. line to the hvac controls

If the system is blowing hot. Then u need to take to a shop so it can be checked for leaks. Also the system will need to be vaced down by a machine to get all the air out of the system and moisure. Then freon can be added.

It's your oil light.

Check your oil light as it's most likely low. Other causes can be a bad sensor, or there's a pressure leak

Sounds like a bad crankshaft position sensor to me. Those often go bad without setting any codes.

check your wiring on the side tat the light dont work with a light tester whith the switch on
your wiring might be broke or you light holder might be no good

Bad connection. You are going to have to test the system by bypass the the ignition and direct start the starter.Go to the engine fuse junction box,you may have a open fuse (the big 0nes) something is disconnected

sounds like you need to replace the ignition switch

Check to see if you have power at the pump and then the relay if you have power at the pump your pump is bad

Make sure you are getting fuel at the fuel rail it looks like a tire valve on top of the motor

Check on the fuel rail to make sure you are getting fuel it looks like a tire valve if you are make sure you have fire to the plugs