20 Most Recent 1982 Ford F 250 Questions & Answers


You could buy a drain pump or drop the tank or siphon the fuel out .You can buy electric pump or hand pump cheap !I saw an electric one on eBay for 30 bucks ,hooks up to the car battery !

1982 Ford F 250 | Answered on Feb 04, 2015


Siphon it out with a hose.

1982 Ford F 250 | Answered on Feb 04, 2015


no spark? ignition module bolted to the side of the distributor or mounted on the fender? Ford module goes out often, keep a spare one and keep the tool handy if your module is mounted to the distributor.

1982 Ford F 250 | Answered on Jan 08, 2015


Solenoid could be stuck due to misalignment of starter to flywheel.

1982 Ford F 250 | Answered on Apr 18, 2014


If you buy a rebuild kit for it, there will be a couple of pages included. One is instructions and specifications, like float height and choke settings, that kind of thing. Another page will have an exploded view of every part or piece, and they are numbered. You follow the numerical sequence when disassembling it . It keeps you from running into trouble. Keep things organized, so you don't get jets or parts mixed up. Use trays with several sections, or little cups, or even a few egg cartons with numbers on each little section. There are a lot of parts- anywhere from about 80 to over 100.
So you get it all apart and clean everything, including all the internal passages in the carb body. People used to use a strong dip available that you could just drop parts into, especially the larger parts that had those passages, and it cleaned them ferociously. I have been told to not even bother with it anymore-environmental regulations have made it rather weak. So just buy one or two cans of carb cleaner and spray everything. Use the little tubes that come with the aerosol cans to hit all the passages.
If you need anymore, you could buy a Haynes or Chilton repair manual for your truck. Lots of information on the carburetors in them. I like the old cars and trucks, still own a carbureted Sentra, but I like fuel injection systems more-nowhere near as many parts to contend with. Good luck.

1982 Ford F 250 | Answered on Apr 14, 2014


I would take some digital photos. I would also ask if some of your adapters need to be removed before turning it in to the rebuilder. This is something that can get separated from the carburetor while the carb is rebuilt. BUT you do need the inlet fitting to keep the strainer in place.

Photos will also show any vacuum lines.

1982 Ford F 250 | Answered on Mar 28, 2014


The clearance lights should be on the same circuit as the marker and tail lights. Do the other lights work ?
If the lights were added after the truck was built, they could have been spliced into the harness somewhere.

1982 Ford F 250 | Answered on Feb 18, 2014


front right corner of engine block under altinator

1982 Ford F 250 | Answered on Jan 10, 2013

Not finding what you are looking for?
Cars & Trucks Logo

178 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85160 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

gerry bissi

Level 3 Expert

4387 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

F-250 Ford

  • F-250 Ford

Most Popular Question

1978 f250 351m carburator

  • Cars & Trucks
Loading...