20 Most Recent 1981 Ford Bronco - Page 9 Questions & Answers

0helpful
1answer

How do I put oil in a Ford Bronco?

There is a cap on one of the valve covers. You pour the oil in that.
10/20/2012 2:37:57 AM • Ford Bronco Cars... • Answered on Oct 20, 2012
0helpful
2answers

I have a `92 ford bronco xlt with a 351w and the

A few months back, if you remember, did you hear a "squeak squeak " that got faster as you picked up speed, then went away as you went over 25 to 30 mph? if so replace your universal joints on drive shaft.
10/15/2012 8:49:42 PM • Ford Bronco Cars... • Answered on Oct 15, 2012
0helpful
1answer

How do I install an Accelerator Cable in 1990 Bronco

Route it as it came out, the firewall retainer just snaps in and out, best to just break the old one.
9/14/2012 7:30:19 PM • Ford Bronco Cars... • Answered on Sep 14, 2012
0helpful
1answer

Smells flooded?

If it is getting too much fuel you should be able to pull a vac hose such as the one to the PCV valve and make the engine speed up.If it is too rich could be a fuel pressure regulator or injector problem.Pull the pump relay and see if it starts then runs out of fuel.
9/14/2012 4:21:24 PM • Ford Bronco Cars... • Answered on Sep 14, 2012
0helpful
1answer

The clutch wil not disengage in my full size 1988 ford bronco its the 6 cylinder with the 5 speed

Could be the clutch disk, or the clutch master cylinder.
9/11/2012 7:57:15 PM • Ford Bronco Cars... • Answered on Sep 11, 2012
0helpful
1answer

I have a 91 ford bronco and its running rich what can i do to fix it

The two things you did not mention is the fuel pressure regulator and the O2 sensor.Have you checked the computer for trouble codes yet ? Is the air filter and housing clean ? Is the engine getting up to normal temp ?
9/11/2012 2:41:28 AM • Ford Bronco Cars... • Answered on Sep 11, 2012
0helpful
1answer

What is the firing order

The firing order for 1988 Ford Bronco 6 cylinder is

1-5-3-6-2-4 The direction is Clockwise distributor rotation.

---------

The firing order for a 1988 ford bronco 302 V8 is

1-5-4-2-6-3-7-8.

And
---------
The firing order for a 1988 Ford Bronco II 2.9L is

142536

The cylinder 1 going clockwise 4-2-5-3-6....Coil in the middle. The number one cylinder is on the driver side in the front.

see fig for 2.9 firing order:--

helpmech_3.gif

---------

This will help.Thanks.Helpmech.

8/6/2012 10:15:27 PM • Ford Bronco Cars... • Answered on Aug 06, 2012
0helpful
1answer

1973 ford bronco speedometer broken at gage

age mainly need to get a quality remanned speedometer to fix this issue.
6/27/2012 4:09:32 PM • Ford Bronco Cars... • Answered on Jun 27, 2012
0helpful
1answer

Classic bronco speedometer trouble

No simple solution i know of other than replacing the speedometer with a high quality remanned.
6/27/2012 1:04:55 AM • Ford Bronco Cars... • Answered on Jun 27, 2012
0helpful
1answer

How to replace water pump on 1982 ford bronco 302ci

Did you apply sealer to the bolt threads?
6/15/2012 7:28:21 PM • Ford Bronco Cars... • Answered on Jun 15, 2012
Not finding what you are looking for?
Cars & Trucks Logo

Popular Tags

86 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1995 Ford Bronco
1995 Ford Bronco

227 Questions

1990 Ford Bronco
1990 Ford Bronco

224 Questions

1994 Ford Bronco
1994 Ford Bronco

178 Questions

1996 Ford Bronco
1996 Ford Bronco

137 Questions

1992 Ford Bronco
1992 Ford Bronco

124 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Bronco Ford

  • Bronco Ford

Most Popular Question

carbuator fuel filter located 1979

  • Cars & Trucks
Loading...