20 Most Recent
1987 Ford F 250 - Page 7 Questions & Answers
Replace spark plugs, cables,distrubutor cap,
What about the distributor rotor?
Did you repalce that as well?
You might need to rotate the distributor sideways while someone cranks it up.
Alternately, your timing may be off, your plug wire connections may be wrong. You could get the Haynes Repair manual to guide you.
Turn the key and not even a click,checked the
check your coil it could be bad. does it jump start? have the alternator tested. If it jump starts disconnect battery and if truck dies then alternator is bad. Best way to test is auto parts store hwever.
No fire
WELL I GUSS YOU MEAN NO SPARK SO I WOULD CHECK CAM SENSOR OR CRANK SENSOR HOPE THIS HELPS
I have an 87 FORD f250 WITH A 302. I pulled the
You can purchase a Chilton's or Mitchell repair manual specific to your year model of truck , it will have body and chassis electrical diagrams. It will about $40.00 for a good repair manual for your truck but you will be the owner of it and can consult it anytime in the future you have an issue with which you need information ...
Battery is charged but when you try to start you
Witch solonoid? the one on the passenger fender or the starter its self? Make sure batt terminals are clean. If you have a test light, test wire at starter(key wire) and see if it lights up when key is in start position. The main wire from battery should be tight as well at the starter too.
Tried to turn ignition over
Your switch behind the ignition barrell needs to be replaced.As this has the tention built into it.Switch has got hot and burnt out the spring and contact
I'm trying to locate a
go to
http://www.aldatadiy.com and purchase the manual for your unit, the engine manegment system including the fuel relays are in the diagrams with detailed information, yo get the info for one year and can print what yo need or don't need, it will also list recall items and driveability problems for the owner and the mechanic.
Yesterday I lost all gauges
no, it's not just a fuse, if it was it would not work only smetimes... probably a problem wiyh the instrument cluster
Not finding what you are looking for?