20 Most Recent
1999 Ford F250 Regular Cab - Page 2 Questions & Answers
What do I need to replace for code c1226?
Take your battery cables off for 10 minutes and hook them back up. This will reset the computer and clear the codes. If it stays popped up, the bulb for the abs system in your dash cluster is burnt out.
Glow plug light doesn't come on my 99 f250
when the light is not on ,there is no circuit for the glo-plugs and so the cylinders are not heating up. This could be a faulty relay that brings in the glo-plugs , loose wires to the relay. The light will be on when there is a circuit though the relay
Where is the pcm located
Have you tried resetting the Inertia switch? This switch will cut off power to the fuel pump. It is usually behind one of the kick-panels. It is a safety switch and has a reset button on it. It can trip by mistake when you shut a door or make any impact motion. It is suppose to prevent gas fires in an accident.
Stuck in park
Not sure about Ford, but my Chevy will not shift if the battery is low or dead. Linkage could be problem but modern trucks like cars are electrical nightmares
Not finding what you are looking for?