Top 20 1990 Dodge Ram Questions & Answers

Of course. It tells the Engine Computer the position of the crankshaft and that controls the spark timing and other functions. https://www.google.com/search?q=1990+dodge+ram+crankshaft+position+sensor+location

I would stick to using a Dodge rear end as there may be sensors and other connecting items that may not be the same between major brands.....Someone at the salvage yard should be able to tell you what years would interchange with the 1990 you have. I would change out the whole rear end as it is relatively easy once you get the leaf spring hanger bolts undone.

It could be a loose wire or a dodgy (lol) flasher unit

Have you verified the fuse is ok, have you replaced the flasher relay?

Check out You tube !

Cruise control is triggered by a vacuum line ! For location refer to You Tube !

Great. Let us know how it goes.

AFTER OPENING THE FUEL SYSTEM IT HAS TO BE BLEED. AIR WILL PREVENT IT FROM STARTING.THE LINES ARE PREFORMED BUT YOU CAN PUT THEM ON WRONG WITH SOME EFFORT.IF YOU REPLACED THESE ITEMS TO SOLVE A EXISTING PROBLEM CHECK THE GLOW PLUGS

genuine workshop manuals have a frame measurement section for the straightening process of the chassis. You may get the information from a small truck body repair shop

PULL STARTER OUT AND CHECK FLYWHEEL TEETH IF OK CHANGE THE STARTER

probably have to replace the flywheel and the starter bendix as both gears probably are worn

same issueand -had good results w/ additiv for cleaning lnjectors- ran it to run temp twice a day .4th day test drive-aced this has lots of could bes so i strted c

We do not have any fuse box diagrams available for this old of a vehicle. Try eBay for a used owners manual.

fuel filter,tune up ,air filter,

Should be at back under near tank.

The rear axle sensor will not cause this. You may have a failing ****** here.

Hello,my name is favour menaki,i will like both of us to be friends please could you write me through my email address([email protected]) so that i can introduce myself for you to know whom i am

Easyest way to get it is go to local autozone and they will print it out for you at no cost. I do it all the time.........please rate this post and good luck and hope info helps.

Remove and replace the caliper first.

check with your local NAPA auto parts store