How do you replace the front turn signal light bulb on a 1998 Chevy Blazer
you have to go under the front of the car. very easy to fix.
Posted on Dec 15, 2008
I replaced the battery in my 1998 Chevy Blazer and now I don't have heat. I have taken out the RDO fuses (which was recommended to me), put them back in, started my Blazer and there was heat for about 20 seconds, then it turned cold. I don't understand why replacing the battery would effect the heating. What can I do?? What do I need to reset?? Thank you for any help you can give.
the problem is the blend door actuator. Its is located behind hte glove box. (as far up and to the left as you get get with your hand). The gear inside the motor will crack if it is overdriven. As far as the re calibration, pull the rdo fuse(s). wait about 30 sec. replace fuse(s) turn car to run wait for 40 sec or so. you should be able to get a flashlight and watch the motor turn back and forth. turn key off. you should have heat. if not, pull the motor out. very easy just two screws. open the motor can check large gear for cracks
Posted on Jan 17, 2009
speaker wire color code
1998 Chevrolet Blazer S-Series Stereo Wiring Constant 12V+ Orange Switched 12V+ Yellow Ground Black Illumination Gray Dimmer Brown Antenna Right Front Front Speakers 6 1/2" Doors Left Front (+) Tan Left Front (-) Gray Right Front (+) Light Green Right Front (-) Dark Green Rear Speakers 6 1/2" Rear Doors Left Rear (+) Brown Left Rear (-) Yellow Right Rear (+) Dark Blue Right Rear (-) Light Blue
Posted on Mar 17, 2009
Need a wiring diagram for my 1998 chevy blazers radio. Would really appreciate some help.
Posted on Apr 03, 2009
how to replace heater core on my 1998 chevy blazer
pretty easy to do. go to passenger side of dash and remove glove box for working room. there is a lower panel below the dash that needs to be removed. disconnect the heater hoses under hood. once panel under dash is removed you will see the heater box remove the 6-8 bolts around the very base of it, it will able to be lowered down and you will see the heater core it has a couple of brackets that hold it in place remove these. put new one in its place and put back together.
Posted on Aug 26, 2009
I need to know what some of the abbreviations in the fuse box stand for. I am trying to determine if its a fuse causing the tailights to go out periodically. It is very different than the fuse block in my '79 truck. I'm thinking its a computer brain problem because of other issues going on, but I want to check the easiest things first, so trying the fuses. Thanks, Yvonne
it could be a bad ground or a bad headlight switch stop by your local GM dealership and they be able to print you off pictures and diagrams so you be able to find it also like to give you this information they only sells GM parts its Schram auto & truck parts 1-800-292-1032 and they website is www.schramauto.com wish you the best of luck Michigan Man.
Posted on Jan 03, 2010
firing order for 1998 chevy blazer 4.3L motor the number 5 is miss firing
For the 1998 Chevy Blazer 4.3L V6:
Firing Order:
1-6-5-4-3-2
Cylinders:
......(back)......
|..6..|.......|..5..|
|..4..|.......|..3..|
|..2..|.......|..1..|
......(front)
Distributor Connections:
...........(back)
Coil-> o
6-----> o.......o <-----5
4-----> o.......o <-----1
2-----> o.......o <-----3
...........(front)
Let me now if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!
Posted on Apr 15, 2010
I need a wiring diagram for a 1998 Chevy Blazer fuel pump
The fuel pump assembly consists of fuel pump relay,fuel sensor,the fuel pump controlling fuse,its ECM B fuse. The fuel pump and oil pressure switch. ----------- For its wiring diagram, click the link below and refer the diagram:--- http://technoanswers.blogspot.com/2011/10/fuel-pump-wiring-diagram-for-1998-chevy.html ----------- This should help.Thanks.Helpmech.
Posted on Oct 06, 2011
my car was running fine then one day, it stopped going in reverse, but it drives perfect in drive 1,2..it sometimes moves forward when i attempt to put it in reverse...could a damaged cylonoid cause this, if so which one...a,b or c. and how would i attempt to fix it.
transmission about to go out get it rebuilt bands inside transmission gone get it fixed before you get stuck .
Posted on Jan 13, 2013
shift indicator lights up but does not display which gear I am in.
Odometer/Gear Shifter (PRNDL) Display FIX - GMC/Chevy ...
? 4:15
https://www.youtube.com/watch?v=-PQ-x11Vjng
Jan 24, 2012 - Uploaded by EricTehRedneck
Odometer/Gear Shifter (PRNDL) Display FIX - GMC/Chevy ...grease, it does in fact help insulate electrical connections but imnot sure lithium would help. .... i have a 2000 Chevy Astro van the park indicator goes out when you start ... volts but now the battery light stays on and the transmission will not shift ...
GM Electronic Gear Indicator and Tripometer Odometer ...
? 5:47
https://www.youtube.com/watch?v=jTQIVS_uB4g
Aug 11, 2010 - Uploaded by zcomputerwiz
Didn't light up anymore. ... Symptoms: PRND321 and Tripometer/Odometer no longer light. ... 2002 which the odometer and shift indicator do not work no more. ... But before taking the dash out I would like to know how to remove those .... Instrument cluster gear select blank screen solder fix Chevrolet GM ...
Repair the odometer/PRND321 LCD display on a '99-'06 ...
www.instructables.com/.../Repair-the-odometergear-select-L...
InstructablesIn this Instructable, I will show you how to repair odometer/gear select ... Repair the
Posted on Feb 09, 2016
1,772 questions posted
Usually answered in minutes!
2,307 Questions
1,793 Questions
1,647 Questions
1,619 Questions
1,503 Questions