20 Most Recent 1996 Chevrolet C/K 3500 Questions & Answers


Fixya cannot supply the diagram.

1996 Chevrolet... | Answered on Jan 01, 2018


REMOVE TRANSFER CASE AND TRANSMISSION/BELL HOUSING
UNBOLT CLUTCH

1996 Chevrolet... | Answered on Dec 29, 2013


too many possibilities. IE: fuel pump relay, ignition relay, Coils, wiring failure, bad starter, fuel pump, fuel filter. The list goes on and on. A local GM experienced mechanic can eliminate most of these within minutes with an inspection.

1996 Chevrolet... | Answered on Oct 31, 2013


Bad shift solenoid in transmissiin is my guess

1996 Chevrolet... | Answered on Nov 16, 2012


Hello
The Engine and Automatic Transmission (not applicable to manual transmissions) in this vehicles drive train are fully electronically controlled by a computer called the PCM and TCM (Power Train Control Module, Transmission Control Module). When a problem like this or other drive-ability related problems occurs the computer stores a record of the problem (there are of course some exceptions to this, like the fuel pump, engine coolant temperature sensor and MAF sensor for instance) in the form of a fault code in its memory, to read these fault codes you must have the systems memory scanned with a special tool. Once the fault code(s) are read you then must perform the appropriate diagnostic testing to find and resolve the problem(s) DO NOT REPLACE ANY PARTS UNTIL A TRAINED TECHNICAIN HAS DIAGNOSED THE PROBLEM TO AVOID SPENDING YOUR HARD EARNED MONEY ON PARTS THAT MAY NOT CORRECT THE PROBLEM. Also always check fuel pressure for correct spec for your make and engine type.

1996 Chevrolet... | Answered on Sep 13, 2012


Seal the threads of the new bolt with loctite brand thread sealer, it is available from most auto parts stores. Don't worry many engine have bolts that go into the water jacket by design.

1996 Chevrolet... | Answered on Jul 13, 2012


The balance fuel pump is supplied power from the ignition E fuse. Power then goes through the balance pump relay which is controlled by the balance pump module.

let me know if you have any questions and I'll be happy to answer them. Thank you for using FixYa.com!

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

1996 Chevrolet... | Answered on Feb 01, 2012


sorry about poor resolution on FixYa.

jturcotte_2460.gif
jturcotte_2467.gif

1996 Chevrolet... | Answered on Nov 02, 2011


where ever its from its BAD and Expensive. The axle bearings are on the ends, near the wheels, the pinion is where the drive shaft is bolted to, there are 2 pinion bearings and 2 carrier bearings. It has to come apart. You may be better to put a used one in, or get a shop that does differential work to take it apart and estimate repairs.

1996 Chevrolet... | Answered on Sep 07, 2011

Not finding what you are looking for?
Cars & Trucks Logo

Popular Tags

92 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

84625 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

3500 Chevrolet

  • 3500 Chevrolet

Most Popular Question

1996 3500 diesel keeps stalling cutting

  • Cars & Trucks
Loading...