20 Most Recent 2002 Chevrolet Monte Carlo - Page 7 Questions & Answers

changed ignition swtich and plastic casing thats connected to the back of switch in my 2002 monte carlo now it wont start.. Ive tried the turn the key for ten min thing it doesnt work someone please help me

changed ignition switch an the back plastic casing in my 2002 monte carlo now it wont start

You either have a bad blower motor or bad blower motor resistor. Odds are on motor since slamming door works lol

did you try moving the steering whell back and forth while trying to turn the key...

2002 Chevy Monte Carlo; connected to wheel (or steering knuckle) is:-lower control arm, connects from frame to bottom of knuckle-tie rod end, connects from steering gear to knuckle -sway bar link, connects from strut to lower control arm

Front sway bar link, or tir rod end. The tie rod end moves the tire with the steering wheel. The sway bar link helps keep the car stable around corners. And is normally a long bolt with washers and bushings running threw a long bar that connects the passenger side to driver side.

Look for a light on the dash that says SECURITY the next time this happens. It is a common problem with an easy fix.http://vatspasslockpasskeysecurityhelp.yolasite.com/

I had that once, got a good engine flush and solved the problem for a long time. Ask your auto parts store.
Gary

You should have battery voltage on one side of the motor and ground on the other. If you have automatic climate control, you have a solid state processor and a control module that handles fan speed. The processor takes the place of the resistor which controls voltage into the motor.You may need a shop manual to get the testing procedures.