20 Most Recent 1998 Chevrolet Tracker Questions & Answers


get onto youtube, type your question into the search box, watch step by step video.

1998 Chevrolet... | Answered on Apr 07, 2017


That depends when they were last taken off. If it's been many years, take it to a brake shop and don't fool with it. Unless you have a big torch, hammers, and lots of patience.

1998 Chevrolet... | Answered on Apr 06, 2017


i will suggest if you dont know how you should not be working on brakes. you tube has many helpful videos to explain the process

1998 Chevrolet... | Answered on Apr 06, 2017


The speedometer cable mechanically drives the speedometer and the odometer

Remove the instrument cluster assembly. Refer to Instrument Cluster Replacement .
Unhook the speedometer cable from the heater case.
Remove the grommet from the bulkhead.
Feed the speedometer cable through the bulkhead.
Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.

Unscrew the speedometer cable (1) from either the transfer case or the transmission.
Remove the speedometer cable (1) from either the transfer case or the transmission.
Remove the speedometer cable (1) from the clamp.
Remove the speedometer cable (1) from the vehicle.

1998 Chevrolet... | Answered on Jan 20, 2017


The switch behind the brake pedal is for the brake lights as well as the shift release. There is a shift release solenoid (relay) that activates when you press the brake pedal. This is at the shifter itself. This is most likely the failed part. Most vehicles have a manual release capability; look in your owners manual to see if you have one and how to access it.

1998 Chevrolet... | Answered on Sep 04, 2016


Removal Procedure
  1. Remove the instrument cluster assembly. Refer to Instrument Cluster Replacement .
  2. Unhook the speedometer cable from the heater case.
  3. Remove the grommet from the bulkhead.
  4. Feed the speedometer cable through the bulkhead.
  5. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
Unscrew the speedometer cable (1) from either the transfer case or the transmission. Remove the speedometer cable (1) from either the transfer case or the transmission. Remove the speedometer cable (1) from the clamp. Remove the speedometer cable (1) from the vehicle.
Instrument Cluster Replacement
Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to the vehicle or its components.
Disconnect the negative battery cable. Remove the hazard lamps switch by gently pulling the knob straight up. Remove the instrument cluster bezel from the instrument panel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement . Remove the 4 screws and pull the instrument cluster assembly forward from the instrument panel. Disconnect the 3 electrical connectors. Remove the speedometer cable at the speedometer head. Remove the instrument cluster assembly from the vehicle.
Remove the 5 screws (2) and the steering column upper and lower covers (1, 3).
Remove the 4 screws and the instrument cluster bezel from the vehicle.

1998 Chevrolet... | Answered on Jun 17, 2015


sound like the battery is dead could be an alternater is not charging the battery

1998 Chevrolet... | Answered on Nov 29, 2014


i used google to translate this language.
i get
Having the electric light of schema REVERSE on chevrolet tracker 1999
the car has 2 transmission, but both have a reverse switch.
first is fuse, replace the backup fuse or reverse fuse.
easy huh.
if both lights are out , are they?
then check the voltage out of the trans reverse switch .
12vdc in but 0v out is a bad switch in REVERSE.
super easy check, no computers data streams and bs.

1998 Chevrolet... | Answered on Sep 26, 2014


Change the fuel filter , Check fuel pressure and fuel flow. check the vacuum line to the fuel pressure regulator , any of the above can cause this fault /

1998 Chevrolet... | Answered on Sep 25, 2014


run fault codes and check for torque convertor clutch solenoid/servo problem . Check TCM

1998 Chevrolet... | Answered on Aug 15, 2014


Is this a manual or automatic transmission? When was the last time the fluid was changed? If it's a 4 speed and a 4 cylinder engine than that could be the right RPM. It could also be the overdrive is not working. Some SUVs have a overdrive override button on or near the shifter.

1998 Chevrolet... | Answered on Mar 08, 2014


You need to replace your torque converter, your Transmission does not move/turn in any way while in park the only part that does is the torque converter. I would also get a full fluid change when that is done as well.

I’m happy to assist further over the phone at https://www.6ya.com/expert/brock_d67526d2a834c47e

1998 Chevrolet... | Answered on Dec 10, 2013


Check the crank shaft sensor.

1998 Chevrolet... | Answered on Oct 28, 2013

Not finding what you are looking for?
1998 Chevrolet Tracker Logo

132 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85160 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Tracker Chevrolet

  • Tracker Chevrolet

Most Popular Question

remove brakes rotor from 1998 chevy

  • Cars & Trucks
Loading...