1996 Chevrolet Blazer - Answered Questions & Fixed issues

Bad fusible link

1996 Chevrolet... | Answered on Sep 04, 2019 | 21 views

If your talking the AC it is locates paseengers side under hood close to fir wall. it will have a silver canister.

1996 Chevrolet... | Answered on May 23, 2018 | 387 views

I don't think that version of blazer has one fitted.

1996 Chevrolet... | Answered on May 11, 2018 | 105 views

I would think the CAT. they tend to clog and make a rattling sound when driving .Seeing you say you did fuel lines witch is another issue with the vehicle in a snowy part of the country they rust out but your fuel pump must be working because who ever replaced the line would have known if the pump was bad they last 10 years then you have to up grade to the new pumps I'm not going to get in to that now.The only other thing it could be is the fuel regulator in witch case just replace all of the injectors and the regulator comes as a unit .But I think its more then likely the CAT is clogged .

1996 Chevrolet... | Answered on Mar 22, 2018 | 53 views

For blower motor, check these fuses. As you can see two fuse go hot with the key on, one is hot all the time. Not only check the fuses, use a test lite and voltage on fuse circuit.
blower motor 1-jyfyjznoely0nd3rilq1551h-4-0.jpg

1996 Chevrolet... | Answered on Feb 22, 2018 | 85 views

seeing as you just changed the pump, can you hear the pump cycle when you first turn the key on? if not check all your plug in wire connections one my not have been in properly and came loose, hope this helps

1996 Chevrolet... | Answered on Feb 21, 2018 | 35 views

The proper name for it is the 'Engine Malfunction Light'.

The steering becomes hard because the engine drives the steering pump, which is part of the power assisted steering system.

The battery light came on because the engine was not running so the battery wasn't charging.

You need to connect the car to an OBD11 diagnostics computer. That will give you a code of what is wrong and from that, what is needed to fix the issue. Probably a sensor somewhere. Garages will normally read the codes for free in the hope of getting the work.

1996 Chevrolet... | Answered on Feb 20, 2018 | 96 views

Are you using a good set of spring compressors. Get the spring good an squashed.

Step back - analyze, is there anything that keeps the ball joints, springs and shocks from seating properly.

Does the new ball joints look exactly, and I mean exactly like the old ones

1996 Chevrolet... | Answered on Feb 16, 2018 | 22 views

What you need to know is the lamp type and you can find that out at any auto parts store.

1996 Chevrolet... | Answered on Feb 16, 2018 | 32 views

How long since a tune-up? Any applicable trouble codes? If you have the spider fuel system, that system is known for problems. I'd probably use a gage and check proper fuel pressure. Could be other issues? Intermittent can be a pain to track down.

1996 Chevrolet... | Answered on Feb 09, 2018 | 50 views

next time u go to start it in the am get in the truck and turn
the key to on and listen for the fuel pump turning on
for about 2 seconds if not before u go to replace the fuel
pump replace the fuel pump relay in the underhood fuse
panel common problem good luck lets hope for a cheep fix

1996 Chevrolet... | Answered on Jan 01, 2018 | 43 views

Your thermostat is sticking or your radiator or heater core is blocked up. If you keep running it like this you will blow the head gasket or worse (warp the heads or block.) if it's not already the case.

1996 Chevrolet... | Answered on Nov 22, 2017 | 94 views

get the unit from a wreckers /junk yard for a 1/4 of the price

1996 Chevrolet... | Answered on Nov 17, 2017 | 85 views

That's a pretty big ask Deb. You're talking dozens of pages. Read this post on where to get wiring diagrams and what's involved in getting the right one. http://ricksfreeautorepairadvice.com/get-car-wiring-diagram/

How to get car wiring diagram Ricks Free Auto Repair Advice

1996 Chevrolet... | Answered on Oct 19, 2017 | 52 views

Fix your car right away, by clicking the link
Chevrolet Blazer

1996 Chevrolet... | Answered on Oct 11, 2017 | 64 views

May have been water or debris pulled into the injectors from running low on fuel . I would run it on some short local runs and a few fullness throttle bursts and see how she does . My favorite Chevy and a beautiful car .

1996 Chevrolet... | Answered on Sep 03, 2017 | 107 views

the front drive shaft when locked in 4 WD does drive the front diff
that inn turn drives the both front wheels if both have the same amount of traction
if one wheel is off the ground then the other will spin at twice the speed as that is what a differential is designed to do
now if you have a problem diff center ( broken teeth etc ) the there will be awful noises, clunks and bangs as the teeth from the pinion and crown wheel mismatch and hit on each other
no noises when in 4WD indicates a good diff center
the next problem will be a broken axle at the splines into the diff center spider gears ( same as one wheel off the ground or in a bog) the only wheels doing the driving are the rear wheels
next are the "u" joints or cv joints but again there will be lots of noises involved
lastly and the most frequent is the drives at the hubs
depending on the hub locks you have it will not n be locking in one or both wheels due to faulty actuator , dry damaged locking mechanism, stripped splines or not manually engaged
understand this --unless you have limited slip differentials or diff lockers on the vehicle any 2 opposing wheels or any wheels on the same side that have lost traction and regardless of being in 4WD or not you will not be going anywhere
so to fix --start at the drive hubs both sides to check actuation , engagement , then work back into the diff

1996 Chevrolet... | Answered on Sep 03, 2017 | 32 views

This truck should not be operated on the street in 4WD mode. You need to investigate the front axel CV axel shafts as well as the outer axel carrier bearings. Damage to front brake rotors and possible lock down while operating the vehicle. Safety hazard exist, so do not drive until axel and bearings are checked and repaired

1996 Chevrolet... | Answered on Aug 23, 2017 | 83 views

Not finding what you are looking for?
1996 Chevrolet Blazer Logo

2,286 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts


Level 3 Expert

85161 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides