20 Most Recent 1994 Chevrolet K2500 Questions & Answers

The fuse block is
behind an access door
at the bottom of the
instrument panel, next
to the parking brake
release lever.

This sound like a fuel issue. Have you replaced the pump? You may also check the fuel regulator valve

Engine size , 350, 454 or diesel ?

DID YOU CHECK FOR VDC AT THAT FUSE

what language is this? how do you even have a drivers licence?

PCM is the powertrain control module, doesn't control transmission, TCM is transmission control module, it is located near underhood fuse box. It can only be programmed by a dealship.

Here is the diagram,It is always a good idea to only disaasemble one side so you can use the other side as a reference,I also reccomend using a set od brake pliers,they will the disassembly and reassembly much easier.

With your system it is bled thru with the regular brake bleeding. If you recently replaced the pads and pushed the fluid back thru the ABS and didn't open the bleed valves on the calipers or cylinders. you probably blew the seals in the ABS. You will have to replace it.

sounds like a bad ignition module.

check fuses first.