20 Most Recent
1987 Mazda B-Series Questions & Answers
I have a 1987 Mazda B2000 pick up. My shifter will not fit back on my newly re-built transmission. Do any other shifters work with this model as I am unable to locate an original for replacement.
I'm sure you have checked the shifter and shifter spring,,...Shifters can be rebuilt also....Make sure your clutch linkage is properly adjusted...The clutch is non adjustable...They may have got air in the hydraulic lines while removing and installing...This would give you a spongy pedal ...Most shifters in order to put it in reverse you push over and up or over and down......if shifter is loose and wobbly it won't have enough force to push the reverse shift rod....However if shifter is in great shape it sounds like the reverse shift rod could be hanging up and not sliding the shift fork...It could be the rebuilders fault......Reverse gear is the largest gear in the transmission and it is located at the back of TRANS which means it will require more force to put in reverse.......I would take it back to rebuilders shop and tell them something isn't right with going to reverse gear...if you wait too long they will think it is something you may have done by incorrect shifting.....
Firing order 1987 mazda b22
You didn't put your engine size so choose the one that is applicable:
1987 Mazda B Series Truck
2.0 liter L4
1987 Mazda B Series Truck 2WD
2.6 liter SOHC L4
1987 Mazda B Series Truck 4WD
2.6 liter SOHC L4
It was making a noise,like
It is probably the lifter or cam shaft. Take a stick and use it as a listening device against the shield and you should be able to hear the difference.
Not finding what you are looking for?