how are you cking for draw? how long before batt dies ,1 day 2 ,3 or more? there are normal amounts of draw in all late model cars,and with a door open you will have different levels of draw for a couple of min after key is removed and doors fully closed,see if door ajar light stays on ,ford switches in the door lock mechs get sticky,just soak with wd40 and work all doors a few times ,they usually come back to life
Hi Kevin,should of bought a 85 nissan 720 4x4,lol,here's a link to replacing your gasket,join the site,it's free then you can use their repair guides.Check my video out.
There is still air in the system or you have a faulty clutch master cylinder. Try disconnecting the line at the master cylinder and place your finger over the hole in the cylinder to act as a non-return valve, have someone gently press the pedal and if you cannot get pressure there and a suction when the pedal is released then replace the master cylinder as there is a blockage in the return and compensating ports.
code p0406 refers to exhaust gas reticulation(EGR) system-flow malfunction===causes --hose blocked/leaking---basic setting not carried out (If applicable) --wiring--EGR valve---EGR solenoid---ECM
