20 Most Recent 1990 Mazda 323 Questions & Answers

Change the ignition switch...that should cure it...cheers

I am not sure why you would need a diagram for the ignition timing? I have no access to data on this computer but mostly even the best data books simply provide the written location of the marks and the basic, stroboscopic and a few auto-advance details. In some cases there must be some preparation to ensure accurate timing. Try the link below https://www.2carpros.com/questions/1990-mazda-323-ignition-timing

Sorry I can't help you I just don't know but I shore would like too if you find out.

motor bad, something is caught in it causing it not to work

check the motor that pops up the light

bad timing

check the bulbs first

yes but proper tune up is best

check the fuse

Go to www.autozone.com Repair guides. It will show you step by step.

return holes in the top of the head screens plugged, easy fix, remove valve cover the holes are small look for a hole it is probable half plugged off with decontaminated oil residue

Sounds like you have a fuel mixture problem. Usually there is a sticker in the engine compartment that gives the spark plug gap. Unless the gap is way off it will not cause this kind of problem.. Are the plugs carbon fouled?

crank sensor

http://www.google.co.in/search?q=1990+Mazda+323&hl=en&prmd=ivns&tbm=isch&tbo=u&source=univ&sa=X&ei=o0tjTqGAJYPkrAen7JSUCg&ved=0CCIQsAQ&biw=1440&bih=799