20 Most Recent 1994 Ford Crown Victoria - Page 5 Questions & Answers

regular from factory If you need further help, I’m available over the phone at https://www.6ya.com/expert/mike_9693b5ad75773352

Duplicate question.

Did you check the fuse?

HelloWhen the service engine soon light (Also called the check engine light) is turned on this is to alert you to the fact that Powertrain Control Module (computer) has detected a failure somewhere in the systems it controls you may not feel any difference in the way the engine runs, this can be the transmission or the engine or emission system, there are fault codes set in the modules memory for these faults. What needs to happen now is to have the powertrain control module scanned with a special tool called an OBD2 electronic engine control scanner or a OBD2 code reader. Once the code(s) are read then you must perform the diagnostics for each code and make the appropriate repairs based on the findings of the diagnosis that was performed, this is called doing "Pinpoint" testing.

how much pressure are you getting at the fuel rail? you also need to check the impact shutoff switch to make sure it is not tripped, it will be a black box usually behind one of the kick panels, with a button on it press the button down to reset then try stating the car

found it.

Most likely the flot in the tank is stuck, To fix this replace fule pump in tank.

Are you sure it isn't misfiring?

Click on the following: direct, FREE Link:
http://autorepair.about.com/library/firing_orders/bl-fo-7202.htm

Let me know if this helped and thank you for using FixYa.com!

Hello john, sounds like you are having a converter lockup problem. The clutch packs may also be worn causing low pressures. Pressure test can be run to determine. Sometimes adding a a non-solvent formula additive such as Lucas transmission fix will help. It's been known to stop slipping in worn transmissions.


I hope this helps.