20 Most Recent 1992 Mazda MX-6 Questions & Answers


Inside the fuel tank

1992 Mazda MX-6 | Answered on Feb 20, 2013


I'm sorry, but that description is too vague to provide any useful "solution" for your problem other than to advise you to have someone that knows about cars to look at it so they can see (and hear) first-hand what is going on with your car.

1992 Mazda MX-6 | Answered on Feb 11, 2012


If all plugs fouling check the fuel pressure regulator.

1992 Mazda MX-6 | Answered on Mar 15, 2011


Check the shaft bearing within the distributor--it the upper shaft noticeably moves in any particular direction, that can can change the reluctor to pick-off coil relationship possibly causing misfire. Take the car to Autozone or similar business for a free scan of the computer and take note of any codes that show up. These codes are clues to whatever component is acting up. Hope this helps!

1992 Mazda MX-6 | Answered on Aug 14, 2010


d3d82d0.gif

1.5L, 1.6L, 1.8L (except K8) and 2.2L EnginesFiring order: 1-3-4-2Distributor rotation: Counterclockwise

1992 Mazda MX-6 | Answered on Feb 14, 2010


Sounds like you have a blown head gasket.

1992 Mazda MX-6 | Answered on Aug 22, 2009


6 degrees.
Firing Order is 1-3-4-2
Distributor turns Counterclockwise. (To the left)
Number 1 spark plug is at the front of the engine, which is at the front of the car.

This information should also be on the Emissions label under the hood.

1992 Mazda MX-6 | Answered on Aug 12, 2009


The non-turbo 2.2 Liter engine?
6 Degrees.
Should be on your Emissions label under the hood.

(Firing Order is 1-3-4-2. Front of the vehicle is Number 1 spark plug. Distributor rotation is -> Counterclockwise. Spark plug gap is .044
44 thousandths of an inch)

Turbo 2.2 Liter engine?
9 Degrees. Emissions label is under hood.

(Firing Order is 1-3-4-2 Front of vehicle is Number 1 spark plug. Distributor rotates ->Counterclockwise. Spark plug gap is .044)

1992 Mazda MX-6 | Answered on Aug 12, 2009


try spraying the ignition components with a spary bottle(water) and see if it causes the car to run rough or miss. It is possible that you may have rubbed through wires, cracked coils, cracked plugs. Also checked plugs for carbon tracking.

1992 Mazda MX-6 | Answered on Jul 08, 2009


change the spark plug wires

1992 Mazda MX-6 | Answered on Jul 08, 2009


Probably gunk or carbon build-up. See if Seafoam works for you, do a full engine treatment. You can find out how to do it on Youtube follow the links.

1992 Mazda MX-6 | Answered on May 11, 2009


Is it making ANY clicking noise when you go to start it? Do you hear the fuel pump energize? Do you have any power for lights or anything?

1992 Mazda MX-6 | Answered on Mar 11, 2009


what wire are you talking about? there should be 2 on the switch

1992 Mazda MX-6 | Answered on Mar 11, 2009


define "overcharges volts"

your alternator will supply enough power to recharge the battery AND keep the car running, which is why you will see 14+ volts when vehicle is running

Mazda MX-6 Cars... | Answered on Jun 06, 2019

Not finding what you are looking for?
1992 Mazda MX-6 Logo

33 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1993 Mazda MX-6
1993 Mazda MX-6

130 Questions

1994 Mazda MX-6
1994 Mazda MX-6

85 Questions

1995 Mazda MX-6
1995 Mazda MX-6

78 Questions

1996 Mazda MX-6
1996 Mazda MX-6

58 Questions

1990 Mazda MX-6
1990 Mazda MX-6

-15 Questions

Top Mazda Experts

Marvin
Marvin

Level 3 Expert

85108 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

MX-6 Mazda

  • MX-6 Mazda

Most Popular Question

overheating stop car checked coolant

  • Cars & Trucks
Loading...