1995 Mercedes-Benz E-Class - Answered Questions & Fixed issues


Did you check the fuses? And for how long was it parked?

1995... | Answered on Feb 02, 2018 | 128 views


First, you really don't give us enough info to help you. What kind of a car? Power door locks? Do you mean the key won't turn in the lock? Is the lock frozen? What country are you in? In the USA, just call a locksmith and they can come out slip a special tool down the window to open it up.

1995... | Answered on Jan 09, 2018 | 45 views


Apart from plugging the car into a diagnostic no its probably cheaper to change the part it could also be a faulty coil pack but if its like my m reg c class there is 1 per cylinder would start but run rubbish if the parts buttons just replace it then you kniw if its that or not

1995... | Answered on Dec 02, 2017 | 54 views


I would remove all the belts as they will get in the way draw a diagram to show how the belts go on just remove the bolts that look like there conected to the water pump dont worry about removing the wrong ones as the rest are just for thev timeing belt cover and wont make any difference as long as they go back in hope this helps ivan

1995... | Answered on Nov 07, 2017 | 56 views


If it has a free wheeling clutch fan it spins faster as the engine heats up.

1995... | Answered on Dec 06, 2014 | 37 views


With out having the car its a bit hard. when the abs light comes on it means a fault of some kind, low brake fluid , faulty censer at the front wheels, a lump of mud can cause them to give a fault report. The engine oil pressure switch may be at fault . Before it is driven again remove the switch and fit a oil pressure gauge start and read the pressure. if OK fit a new switch, if not don't drive the oil pump bypass valve may have stuck open or have a broken spring.

1995... | Answered on Dec 06, 2014 | 24 views


faulty blower switch or relay.

1995... | Answered on Dec 06, 2014 | 73 views


With the ignition on check there is Voltage on one side of the brake light switch with the brake pedal at rest , depress the pedal and there should be voltage at the other terminal . if not bad switch, if ok blown bulbs or bad connection.

1995... | Answered on Dec 06, 2014 | 70 views


call dealer parts dep. with VIN# ask for parts, they will give you the #

1995... | Answered on Dec 02, 2014 | 78 views


short in horn wiring....try spraying wd 40 on exposed horn wires if you can get to them

1995... | Answered on May 07, 2014 | 37 views


sound like you have had a circuit over load from a short and now there will be burnt wires under the dash . Check for what wires have burnt and then check the fuse size for that circuit as it should have burnt out before the wires did.

1995... | Answered on Mar 08, 2014 | 203 views


open a window or get air con fixed

1995... | Answered on Aug 24, 2013 | 18 views


Have the fault codes read. Replace faulty items. Use only genuine items as replacement as non-genuine are not always compatible with the OEM fitted CPU units. This results in the fault codes not cancelling out

1995... | Answered on May 18, 2013 | 82 views


have you checked the crank position sensor (CPS)?

1995... | Answered on Mar 02, 2013 | 2,214 views


It should be in the manual supplied with the car. If not call mercedes and give them your vin, reg private detail etc and if you get a nice person,problem will be solved. It happen to me, but not a merc that you gladly own. I'm n battery not sure about this advice but a merc uses a high voltage and you may need a new battery.

1995... | Answered on Dec 20, 2012 | 136 views


If the fan that cools the condensor is not working then the aircon will not work .

1995... | Answered on Dec 02, 2012 | 234 views


RUN THE scanner and computer do not waste the time and your money. The EMC OR BCM is faulty or speed sensor faulty with the scanner determine which is faulty.
God bless you

1995... | Answered on Oct 04, 2012 | 162 views


Hello


The Engine and Automatic Transmission (not applicable to manual transmissions) in this vehicles drive train are fully electronically controlled by a computer called the PCM and TCM (Power Train Control Module, Transmission Control Module). When a problem like this or other drive-ability related problems occurs the computer stores a record of the problem (there are of course some exceptions to this, like the fuel pump, engine coolant temperature sensor and MAF sensor for instance) in the form of a fault code in its memory, to read these fault codes you must have the systems memory scanned with a special tool. Once the fault code(s) are read you then must perform the appropriate diagnostic testing to find and resolve the problem(s) DO NOT REPLACE ANY PARTS UNTIL A TRAINED TECHNICAIN HAS DIAGNOSED THE PROBLEM TO AVOID SPENDING YOUR HARD EARNED MONEY ON PARTS THAT MAY NOT CORRECT THE PROBLEM. Also always check fuel pressure for correct spec for your make and engine type.


1995... | Answered on Sep 19, 2012 | 481 views


You may be stuck with a dealer sorry that would be stealer or a salvage harness. There are quite a few places to get much better prices on parts such as autopartshausaz but I don't believe I have seen a harness listed. i would try parts finder.com and I'd hit a few of the forums. The guys there are pretty helpful and someone might be parting out the car etc.

1995... | Answered on Aug 17, 2012 | 137 views

Not finding what you are looking for?
1995 Mercedes-Benz E-Class Logo

221 questions posted

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Marvin
Marvin

Level 3 Expert

84619 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...