Top 20
2003 Mercedes-Benz E-Class - Page 6 Questions & Answers
Brake warning comes on. Brakes are good. change
The brake sensor does many jobs. It senses air in the brake lines, electrical problems with the anti lock system, any other systems associated with the brakes. Have your brake system bled and all systems checked before changing the sensors.
1/14/2010 10:00:13 PM •
2003...
•
348 views • 0 helpful votes
My 2004 E 260 boot lid has jammed, along with the
not a solution, but exactly the same happened to me this morning. Boot motor jammed partly open and both number plate lights came up as not working on computer, very odd as all worked perfect yesterday. Did you fix yours? Thanks
12/17/2009 9:49:12 PM •
2003...
•
143 views • 0 helpful votes
Keeps getting stuck on emergency gear
Hi,
Erasing the error does not resolve the faulty component.
The transmission is protecting itself from further damage - you need to establish what codes are being stored in the transmission computer, when it goes into emergency (limp mode).
So, have the transmission computer scanned by your local Mercedes dealership, for the relevant codes and you will identify the actual faulty electrical components related to the transmission.
If no codes are stored, then it is likely you have a mechanical issue inside your transmission.
Only when you fix the fault, will you achieve a permanent solution.
Cheers,
11/12/2009 10:17:09 AM •
2003...
•
290 views • 1 helpful votes
Orange engine light came on while driving. car
sounds like the engine management light u need a diagnostics test at the garage where they link ur car to a computer and can reset everything hope this is helpful have a nice day :)
10/13/2009 7:15:51 AM •
2003...
•
370 views • 0 helpful votes
Hi sir I have a proplem with my mercedes
What dose it do, as the radiator and all pipes have to be changed and was the convertor taken off the box when you took the box out of the other car and if so was it drained and was the bands checked out that the Forwards and reverse plus the correct oil to be used when filled.
1st jack up and put in Park can you turn the wheels NO,, good now select D can you turn the wheels now
Yes so the bands inside could be your problem.
Let me know how you go Ron
10/3/2009 12:28:10 AM •
2003...
•
148 views • 0 helpful votes
I have a e500 2003 i change the front brakes and
dealer only ,later model locks security immobiliser on ,then its dealer only ,with only dealer parts and the bar code on the packet has to be read by the dealer computer ,for the factory computer to unlock the immobiliser ---been their got the teashirt ,done a customers car --wouldnt start,breakdown truck to dealer ,took out the pads i put in and renewed with genuine merc and the brake discs as well and they looked fine to me ,780euros plus the breakdown truck another 80 .
9/1/2009 8:05:59 PM •
2003...
•
235 views • 0 helpful votes
2003 Mercedes E32O with a machine gun door lock
you have to replace door lock completely , there is small plastic gear on electric motor which moves locking mechanism and seems that gear is broken, but it is not available as separate part.
6/4/2009 3:33:19 AM •
2003...
•
1,705 views • 1 helpful votes
Car sat for 5 days not driven, now get "Stop car too low" error
Sounds like you may have a leak in the airmatic suspension struts on the rear. These govern the height of the car in different modes. Not an immediate problem unless you are loosing a visible amount of fluid but it will only get worse.
To check if you have airmatic you will have buttons just behind the gear lever which can be used to put the car in to a stiffer, lower mode or to raise it for rough ground
6/29/2009 5:22:35 PM •
2003...
•
709 views • 2 helpful votes
Not finding what you are looking for?