20 Most Recent 2002 Mercedes-Benz SLK-Class Questions & Answers

By having it scanned and cleared with an OBD tool. This light comes on when it detects a problem. Could be a bad gas cap, or it could be a misfiring engine. The code you get from having it scanned will pinpoint the trouble area

It does go under the foot well with i think another bolt but i think this one is steal as the others are plastic so will probably be rusty after removing the arch there should be enough room to remove the bottle especially if the wheels been removed

There's a wiring short or earthing problem somewhere on the fuse 25 circuit. You can spend a lot of time trying to track down a wiring fault. My honest advice would just be to take your car to an auto electrician and let him sort the problem out.

Hi,not as strait forwould as you would think,you need to first undo the cover under the steering,then you have to disconnect the brake master cylinder from the brake peddle and the cables to the switches then undo the bolts that hold the braket that holds the peddles,then when you have done that you can take the clip off the end of the braket to release the peddle,I hope this has been some help,my advice would be to buy a haynes maneul to refers to,all the best.

you cannot ....the idle is pre programmed by the computer. what is the problem you are having, describe in detail please?

Pull it out and put a new one in

this is the part no of power steering fluid,
0019892403you can get it from
www.autohouseAZ online shopping,

hi believe it or not this is a programmable switch for your automatic garage door, i have a link for you and it will show you all about your car, just click link and away you go...hope this helps please vote thanks

http://www2.mercedes-benz.co.uk/content/unitedkingdom/mpc/mpc_unitedkingdom_website/en/home_mpc/passengercars/home/ownership/interactive_owners_manual.html

sounds like a bad sending unit in the tank, check the wiring to sending unit going to tank.

Check the battery of your remote that could be accessed by removing the plstic cover. If that does nt work, remove the fuse with anti theft system kit, engine will wake up then, hope this will solve the problem

time to replace ignition switch or foreign object is in way most likely worn key

Chage fuel filter and add some fuel addetive.That should clean out any exsses water and maintain a good fuel supply

Hi it is possible on your car that it will have a obd2 socket but will not be obd2. What are you useing to try to read the fault codes?
As far as the fault goes have you tried a new MAF?