20 Most Recent 1995 Mercedes-Benz S-Class Questions & Answers

radio ask for code

Please remove the radio and supply me with the last 4 digits of the Radio Serial Number so that I can give you the code.

check fuses , battery in remote . and make sure the car in park

you lost me on "inside cluster" which cooling temp sensor air con /climate control ? or motor cooling fans

not on a benz a faulty temp sender on the motor will stop the temp needle from reading

It has a short in the wires . Between the door and the door jam. Not fun to fix.

yes they can but unlikely-more likely a bad over voltage relay(powers up idle speed computer) or wire harness-your vehicle is probably a hfm type fuel injection they changed from lh that year. find out if it is lh check the fuses in the base module located in the passenger side of the engine compartment under a cover held in by 4mm allen head bolts-alot of times these control units have intermittent contact with there connectors. asr stands for acceleration slip regulation-both isc and asr communicate via can system to monitor throttle position- ea isc cc-idle speed cruise control and electronic actuater(throttle)-hopefully i have helped

Are you talking about turn signal indicator lights flashing on and off? If so it sounds like there MIGHT be a broken or loose connection in your turn signal switch mounted in the steering wheel.

The engine wiring harness is notorious to fail on the 320 engine. There was not enough heat shield used and this problem is common. You will likely need a new harness. You can buy them for about half as much on e-bay as you can from Mercedes but you must know the exact part number from your existing harness. I would highly recommend buying a new harness over a used one but this is your call. They unplug completely as the harness wraps around the motor.

you may not be avail to disable, actually let me re-frame that, when the light is on the system is disable, limp mode. is hard to do with out a scanner, but if you have one, replace your brake switch, and reset the light. the brake switch controls the ASR/ BAS/ STABILITY CONTROL/ THE CRIUSE CONTROL. CHANGE IT WILL FIX YOUR CAR.

Is it your fuel pump--how would anyone know that ? You have to perform component tests first, to find any problem, with any vehicle You make the repairs as you find problems & only replace parts that fail a test,then continue on with the component testing, road testing & such A failing fuel pump won't likely be felt by how press the gas pedal, there is no connection there Check fuel pressure at the motor There is never a person that comes to this site & we get thousands a week, that install plugs,wires & sensors & never test or check a thing & never fix a thing. Learn the vehicles systems & how to test them,never install parts Those days were the 1960's --won't work with today's technology Check any type of idle air control valve or solenoid you may have Check for vacuum leaks & egr system issues