20 Most Recent 2001 Mitsubishi Diamante Questions & Answers


Need code for radio
Model# MR490090
Serial# 99D22887

2001 Mitsubishi... | Answered on Dec 25, 2018


in order to get the code for that car you are going to have to call the dealership. and give them the specs on your car and maybe even your vin number.

2001 Mitsubishi... | Answered on Jan 24, 2018


1. Adjust the rear drum shoes for minimal clearance. Note that the linings may need replacing.

2. If necessary (and may not be) replace the two hand brake cables. Cables can rust solid and jam, but rarely break.

3. Remove the center tunnel cover between the front seats. Adjust the cables so the hand brake handle has minimal upward movement.

4. Put it all back together.

2001 Mitsubishi... | Answered on Nov 17, 2017


get the help from company original repair and service manual and solve your problem you can get the manual from the given link easily http://toolsnyou.com/

2001 Mitsubishi... | Answered on Nov 04, 2017


Sounds like the timing is off. Check to see if you may be off a mark or two. Align all makes starting with the crank.

2001 Mitsubishi... | Answered on Oct 01, 2017


You will need to call the Mitsubishi dealer for the code. Some dealers make you come in to prove you own the radio.

2001 Mitsubishi... | Answered on Sep 28, 2017


Here goes:
Please do not drive the car.
Have the car towed to a well-recommended garage
Have someone unscrew the oil pressure light or gauge sending unit in the engine block and screw is a oil pressure guage ( hand held, used in garages).
Test that pressure carefully at all speeds.
Either you have: a bad oil pump, a plugged oil filter, a clogged oil passageway, or a bad engine.
The ticking sound might be valve lifters that are not receiving oil.
God bless your efforts.

2001 Mitsubishi... | Answered on Jul 07, 2017


There is usually no printable information pertaining to motor mount replacement. Experience in automotive repair is the key to replacement. You can try a repair manual respective to the vehicle in question for mount replacement.

2001 Mitsubishi... | Answered on Feb 29, 2016


The firing order is 1-2-3-4-5-6, and here is a firing order diagram to help assist you and let me know if you need any help to understand this diagram, or if you require any further assistance.


1014d40.jpg

2001 Mitsubishi... | Answered on Nov 28, 2015


check bulbs, fuses , switch process of elimination, nothing else for it

2001 Mitsubishi... | Answered on May 26, 2015


LOOK TO SEE IF THE VALVES ARE MOVING WHEN IT IS BEING CRANKED. TO DO THIS REMOVE THE OIL FILLER CAP IN THE VALVE COVER AND PEEK IN THERE WHILE CRANKING. THIS WILL SHOW IF THE TIMING BELT IS INTACT OR NOT. THE SPARK CAN BE TESTED BY INSERTING A SCRWDRIVER INTO ONE OF THE SPARKPLUG CABLES AND HOLD THE METAL PORTION OF THE SCREWDRIVER VERY NEAR A KNOWN GROUND. CRANK AND OBSERVE WHETHER YOU HAVE A BLUE SPARK HITTING THE GROUND YOU SELECTED.

2001 Mitsubishi... | Answered on May 05, 2015


Search for that on YouTube.com entering your cR info an cv axel

2001 Mitsubishi... | Answered on Mar 26, 2015

Not finding what you are looking for?
2001 Mitsubishi Diamante Logo

371 questions posted

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Diamante Mitsubishi

  • Diamante Mitsubishi

Most Popular Question

replace door latch mitsubishi diamante

  • Cars & Trucks
Loading...