20 Most Recent 1988 Mitsubishi Cargo Questions & Answers

im looking for information by a 4d32 Mitsubishi , help!!!!!! thanks

I really think you should go to www.reliable-store.com they have got books on every vehicle and also how to service/repair it, parts info, wiring diagrams, electrical diagrams, fuse diagrams, error codes, etc everything

4d34 cylinder head torque

your best bet is to put in 3 quarts then see if there is anything showing on the dipstick if not add another quart at a time until you see something or it's at the fill level on the dipstick. when I do this I leave the dipstick either out completely or half out so oil doesn't splash up on it while pouring in that was I don't have to wipe it each time. typically from the bottom of the dipstick to the max fill line is one to 1.5 quarts, so don't worry about overfilling if you are checking between each quart. And if you buy 5 quarts and you have an extra, just save it for the next oil change.

clutch booster.
(PLEASE RATE MY ANSWER!)

Have engine replaced or overhauled, rod or main bearing has worn out. If you need further help, I’m available over the phone at https://www.6ya.com/expert/michael_2496c4f07ad24453

this happens if the window goes down too far because the stop has moved or broken off. Try refitting it as there should ne no parts necessary as the rollers are either "v" shaped or will run in a track. Make sure the window glass channels are correctly adjusted after fitting the roller back in and check for max down position

MITSUBISHI 4D32 3567CC 110HP@3500 MITSUBISHI 4D36 3567CC 110HP@3500 MITSUBISHI 4D33 4214CC 125HP@3200 MITSUBISHI 4D35 4561CC 140HP@3200 MITSUBISHI 4D34T 3907CC 165HP@3200 MITSUBISHI 4D34 3907CC

mcdevito75 here, BEST BET, contact any Mitsubihi dealership fpr this manual.

have you changed the fuel filter?