20 Most Recent 1999 Mitsubishi Montero Questions & Answers


Is there any way of fixing this problem?

1999 Mitsubishi... | Answered on Aug 13, 2019


sounds like the cabbruter is losing pressure cheak tubes may be lose or damaged

1999 Mitsubishi... | Answered on Oct 15, 2018


run the fault codes
if the engine is too early for ECM controls , it indicates a governor problem in the fuel pump
in that case have a diesel specialist shop check it out

1999 Mitsubishi... | Answered on Apr 19, 2018


unless you have a specific issue with the plugs , don't waste your money changing them
the v6 engine has the rear plugs as platinum plugs because it is near impossible to change them and modern engines
( manufacturer design fault in the location of the engine and so they fitted special plugs before installing the engine )
plugs last the life of the engine
if you are doing a "tune up" that is a waste of money as the ECM tunes the engine 60 times a minute
all you have to do for a "tune up" is to have the fault codes read for sensor problems

1999 Mitsubishi... | Answered on Sep 19, 2017


I have had a similar problem with mine. The repair shop is telling me there is oil seeping into the alternator and shorting it out. I am going to soo if I can put some sort of shielding around it to prevent this.

1999 Mitsubishi... | Answered on Mar 08, 2016


Mitsubishi usually places their engine code numbers on the engine block. They are stamped on a flat surface usually on the passenger side and should be viewable without removing too much stuff. These stamped numbers can be faint at times if the stamp machine did not indent the number deeply. On later models, the numbers are located near the oil filter and below the spark plugs area. Mitsubishi also posted metal plaques on the firewall to show engine model as well.

1999 Mitsubishi... | Answered on Jun 12, 2015


Could bad switch, or the relay/s to the headlights, or are you sure the bulbs have not burned out?

1999 Mitsubishi... | Answered on May 04, 2015


Yes, you have to drop the transmission.

1999 Mitsubishi... | Answered on Feb 06, 2015


the speed sensor is located in the transmission near the prop shaft. has nothing to do with the clock. you may want to check the fuses first

1999 Mitsubishi... | Answered on Dec 18, 2014


You need a "timing light" to set your timing.

1999 Mitsubishi... | Answered on Dec 16, 2014


you want all 100+ steps????? and tools and ? photos.? really?
which engine?
3.0 L 6G72 V6
3.5 L 6G74 V6
2.5 L 4D56 TD I4
2.8 L 4M40 TD I4
3.2 L 4M41 TD I4

big differences with each.
where is the best place for information (not xxxx)
but
  1. the Factory FSM service manual.
  2. alldata.com (USA spec cars)
  3. any real mitsubishi forum.
google 1st hit.
http://mitsubishiforum.com/forum/

1999 Mitsubishi... | Answered on Jul 08, 2014


How old is the battery? some survive 5 year, some 8, but that is about the max. Then you always should check if there is still enough fluid in the battery. Don't use normal water. distilled water only.

1999 Mitsubishi... | Answered on Jul 03, 2014

Not finding what you are looking for?
Cars & Trucks Logo

236 questions posted

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

Marvin
Marvin

Level 3 Expert

85178 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Montero Mitsubishi

  • Montero Mitsubishi

Most Popular Question

find

  • Cars & Trucks
Loading...