Top 20 1990 BMW 5 Series - Page 6 Questions & Answers

Check starter solinoid

change relay

Read the trouble codes for your automatic transmission using a scan tool. I like the wireless ELM327 OBD2 adapter and OBD Fusion app. The trouble codes will tell you why the transmissiion is putting the car in limp mode.

check for broken alternator drive belt if broken the battery will be flat

Check fuses first, then check the wiring connections to the buttons. Possible the plugs are corroded and just need to be unplugged, cleaned, and plugged back in.

BMW X5 2000 2001 2002 2003 2004 OEM Factory SHOP Service ma This link can help you. all the best !!!!!!

First check transmission dip stick for correct fluid level. Next schedule a transmission filter change. This should have been done at 60,000miles

visit on the link ad i am sure your problem will be solved http://toolsnyou.com/

WTF BMW

Pull the out and test to make sure they are getting power.

The first thing you do is take it to the Beemer dealer and have a diagnostic scanner hooked up to see what is going on.

Sounds like it's your switch or a bad relay

you need to read the airbag code which will give you the solution instead of just resetting it. Common recurring problems are the occupancy seat sensor and the seat belt connector sensor.

Check the break fluid level.

You are trying to fix transmission problems by reading engine codes. Doesn't work. Get someone to read the transmission codes.

check for a bad coolant temp sensor. Also a dirty air filter will affect turbo spool up (turbine speed). A clean air filter is critical to turbo performance.

Press the Up/Down buttons on the steering wheel until Settings is displayed on the instrument panel, then press the OK button. If you need more help email me at [email protected]

wiper relay is in the Ebox in the right rear engine compartment. rain sensor is in the center windshield behind the rearview mirror

verifiy the drive shaft U-joints for loose, or drive shaft bearing mount for loose.

Hold down the left dash bottom while holding the button down turn the key on then letgo of the bottem and pres and hold again till reset flashes letgo and pres one more time