20 Most Recent 1990 BMW 5 Series Questions & Answers


There is a round plastic container near the left hand side between engine and mud guard. Unscrew the top and you will find a dipstick that shows correct fluid level. Use transmission oil sold at garages etc. The brake fluid container is on the same side near the radiator.

1990 BMW 5... | Answered on May 29, 2014


have you checked horn fuse?

1990 BMW 5... | Answered on Apr 07, 2014


My blower motor makes a bad noise on all speeds. I guess I need to replace the motor?


1990 535 i

1990 BMW 5... | Answered on Jan 24, 2014


Here is a thread I found that has a few suggestions that appear relevant:

http://www.bimmerfest.com/forums/showthread.php?t=533112

If you find a solution there post it here for the next BMW owner with the same issue!

1990 BMW 5... | Answered on Nov 16, 2013


I m a locksmith and had the same problem

What you do is:

HOld The handle up while you turn the key to the opening direction, it will feel as though it may bend the key but it will not.

keep pulling the handle until the button pops up it works I did it

1990 BMW 5... | Answered on Aug 03, 2013


You will need to take it to somebody that has a scan tool or a OBD 2 or better scanner. I think ammco, kragen, or autozone will hook up a scan tool and turn it off for free. check it out

1990 BMW 5... | Answered on Apr 16, 2013


Hi, you dont say how much oil is in the body but if its a high miler some residue is normal as it seems to make its way up via the vent tube.This can be cleaned out with a good throttle body cleaner. But remove the body from the intake system first as you dont want to dose the engine with this stuff as it will cause the engine to over run if too much is fed into the intake. Let it dry out before re starting the car. Be carefull.

1990 BMW 5... | Answered on Apr 14, 2013


Do not believe it should stay on. Does it stay on even after you open the door and remove the key? Does it ever go out? Let me know and I'll try and help

1990 BMW 5... | Answered on Feb 13, 2013


its ounds like the starting motor but get the anty theft checked as the cut off might be playing up

1990 BMW 5... | Answered on Sep 21, 2012


ther is not one just hold the botom on each corner and give it a tug upwards. hope this helps

1990 BMW 5... | Answered on Sep 12, 2012


Sounds like you have problems with a part called the valve body inside the transmission or other hydraulic control problems, i suspect you will need to overhaul the transmission to cure this.

1990 BMW 5... | Answered on May 01, 2012


You could have air in the clutch cylinder or there could be wear in your clutch master cylinder, You need to start by checking the fluid the the reservoir and then try bleeding the clutch, if this doesn't help then you will need a repalkcement master cylinder, It is recommended that you replace the slave cylinder at the same time as well as the flexible rubber hose.

1990 BMW 5... | Answered on Mar 09, 2012

Not finding what you are looking for?
1990 BMW 5 Series Logo

143 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2001 BMW 5 Series
2001 BMW 5 Series

591 Questions

2005 BMW X5
2005 BMW X5

518 Questions

2002 BMW 5 Series
2002 BMW 5 Series

362 Questions

2003 BMW 5 Series
2003 BMW 5 Series

260 Questions

2004 BMW 5 Series
2004 BMW 5 Series

228 Questions

Top BMW Experts

stephen Kiarie
stephen Kiarie

Level 1 Expert

32 Answers

vince

Level 3 Expert

1234 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1175 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

X5 Series BMW

  • X5 Series BMW

Most Popular Question

heater blower motor not work 1990

  • Cars & Trucks
Loading...