20 Most Recent
1985 BMW 3 Series - Page 8 Questions & Answers
Sump remove
You will have to remove the front axle unit / subframe. The engine has balance weights in the lower part of the engine so be careful. Good luck.
How to enter known radio code
You use the preset buttons on the radio to enter the code and it starts working ! If it says CODE WAIT then leave key in car with ignition on for appx. A hour to an hour and a half and it will then say CODE
2009 BMW X-3.0i SAV AirBag, 4X4 & the BRaKe DashBoard Light's are ON @ SaMe TiMe ???
Does it have a funny clicking noise that you can hear underneath the car? If so , then the transfer case motor plastic gear is stripped. You can buy a new one at the dealer for a mere $1300 , or one on ebay for about $900, or if you are handy, you can buy just the gear on ebay for about $25 bucks, take the motor out and change the gear. There are good youtube videos of how to do this. I did this on a 2007 x3 and it wasn't too painful.
Bonnet cable not working
REMOVE KIDNEY GRILL, GET A DENTAL PICK, TUG ON THE OPEN SPACE THAT EXPOSES THE CABLE RIGHT BEFORE IT GOES TO THE LATCH, TUG ON IT TO ACTIVATE THE LATCH AND IT WILL OPEN
How do i replace a blower motor in a 1999 bmw 323i convertible?
Hi JT. The blower can be accessed from under the hood. The plastic grille trim piece must be removed. There is a panel held to the firewall with 4 screws that comes off. The wiring harness in that area needs moved out of the way and the plastic engine covers come out of the way. The blower motor has a plastic cover held in place with small springs clips. The clips are easy to drop so be careful. The blower motor wheels must be removed and installed in the car. It is not possible to install or remove the motor with the wheels on it. It sometimes also helps to put the wipers in the vertical position.
How to reset immobiliser
I don't know that you reset it but normally you get the right key or disengage the security system it depends on the model of the car.
Not finding what you are looking for?