20 Most Recent 2001 Oldsmobile Silhouette Questions & Answers

0helpful
1answer

Where is the EGR valve located on 2001 Oldsmobile Silhouette?

The EGR is mounted to the intake manifold--look in the right rear area behind the throttle body mechanism. There are two 10mm nuts, as well as a 10mm clamp screw holding it down. Remove the clamp screw first, then remove the two 10 mm nuts. You should first remove the intake air hose between the air filter and the throttle body, then remove the two front engine mounts, then using a ratchet strap, pull the top of the engine forward until it contacts the radiator fans. This will give enough room the reach the EGR valve and the exhaust pipe beneath it.
11/2/2019 7:14:14 PM • 2001 Oldsmobile... • Answered on Nov 02, 2019
0helpful
1answer

2001 Oldsmobile Silouett transmission dipstick tube. Is it bolted to transmission or rubber seal

Most likely a rubber bushing......If it is leaking from the tube........it may be to full of fluid......ATF level is checked with engine running at operating temp.....Should be in the hash marks on the dip stick..........
4/22/2019 6:20:31 PM • 2001 Oldsmobile... • Answered on Apr 22, 2019
0helpful
1answer

Size bolt on idler pulley on 2001 oldsmobile silhouette

Should be a 15mm
3/31/2019 3:50:49 AM • 2001 Oldsmobile... • Answered on Mar 31, 2019
0helpful
1answer

Why does the heater blow cold air in the front but produces heat to the rear?

Depending on the vehicle you could have 2 different units most suvs and vans use a front and rear u it.
2/6/2018 6:36:27 AM • 2001 Oldsmobile... • Answered on Feb 06, 2018
0helpful
1answer

Brakes grab and make a noise when turning

If you know how the brakes work, then you would know that brake application involves brake pads coming in contact with rotors, and it is due to this the car comes to a stop. There are several reasons due to which you could be hearing noise from your brakes. We discuss them all in this article and let you know how to stop them. Read more : Why do brakes make noise and How to stop it AutoPortal brahe noise-0s2cyaov4igmhrfkxw4vdbod-5-0_0.jpg
1/8/2018 7:22:41 AM • 2001 Oldsmobile... • Answered on Jan 08, 2018
0helpful
1answer

2002 Oldsmobile Silouette Air Conditioning

The CLU is the compressor clutch - sounds like there may be shorted wiring in the clutch coil, causing it to draw too much current.
10/2/2017 9:04:20 PM • 2001 Oldsmobile... • Answered on Oct 02, 2017
0helpful
1answer

What is the position oemp gauge on 2001 olds silouette

???????????????????????????????????????
8/17/2017 11:17:09 AM • 2001 Oldsmobile... • Answered on Aug 17, 2017
0helpful
1answer

Headlamps not working.

is the light setup one ballast for high and low beam ? if so the ballast has gone, probably even the bulbs. replace the ballast and bulbs. some aftermarket ballasts don't last, if you cannot find the right ballast for replacement you will need to replace both ballasts. as every ballast set are set the same and sold in pairs.
6/1/2017 8:48:36 AM • 2001 Oldsmobile... • Answered on Jun 01, 2017
0helpful
1answer

I am getting a white smoke coming into the cabin

most likely just water vapor from the heat of the cab interior cooling on the evaporator coils just like you smoke from your breath on cold mornings
4/10/2017 12:07:32 AM • 2001 Oldsmobile... • Answered on Apr 10, 2017
Not finding what you are looking for?
2001 Oldsmobile Silhouette Logo

609 questions posted

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Silhouette Oldsmobile

  • Silhouette Oldsmobile

Most Popular Question

air control sensor in 2001 oldsmobile

  • Cars & Trucks
Loading...