20 Most Recent 2005 Chevrolet Tahoe - Page 8 Questions & Answers

Check the spark plug, fuses, and shift lockout.

jack up an secure truck loosen but dont remove center hub nut ,remove wheel, brakes,hang calipre out of way,remove brake support bracket,disconnect abs connector up by frame,remove rotor remove the 3 bolts that hold hub [wheel bearing] in place remove center hub nut remove hub clean area replace hub rebolt all and done

You need to ground it more so u don't get static that's all or find a better ground

Does it have dual temperature controls? and if it does the other side dont change so check on your control. If is a single control than the vents are not opening on the passenger side. look for a plug not working

In most cases once you replace the actuator, you have to calibrate it with a scan tool thru the computer.

Sending unit is bad. Take it back to the dealer. They owe you to fix it irght and there should be no labor charge

60 amp

Unplug it,unbolt it & switch it out with the new one

did you check fuse

go to autozone.com. register your vehicle with them. Look up head gasket on their replacement parts line. They will give you the sequence and specs for Free and you can print them out for free also. My advice is free and so is theirs.