20 Most Recent
2000 Buick Regal - Page 9 Questions & Answers
Po440
P0440 is an EVAP Emission Control System Malfunction.
2000 buick regal is stalling with no check engine light
First, I think you have been going to the wrong mechanic if he is going to charge you $500 to diagnose a simple stalling problem.Second, just because the check engine light is not on, does not mean that there are no fault codes stored in your computer. Some codes only turn the check engine light on if the problem is present at the time that you have the engine running. Other codes do not turn the check engine light on at all, but will usually store "Freeze Frame Data" to allow a technician to see what the operating conditions were when the code set.So it would still be advisable to scan your engine computer for possible codes.With all that said, your Regal is equipped with a 3.8L engine. Those things are notorious for the crankshaft position sensors going bad and not setting any codes.They are also known for the ignition control modules going bad and causing a no-spark condition. When this happens it will usually set a code for EST Spark Timing (which may or may not turn the check engine light on).
Wind shield wiper
Check to see if the stud that they sit on is not spinning . Make shure that they are tight. Start by parking your wipers. then loosten the wipers and put them back on where they should be parked and tighten them up this should fix the problem . If not you may need to buy new motor unfortunatel. I hope this helps. Don't forget to rate my answer. thanks.
Not finding what you are looking for?