Sunroof / Moonroof: Service and Repair
Removing and Installing Complete Glass Slide/Tilt Sunroof (Frame)
54 12 211 Removing And Installing Complete Glass Slide/Tilt Sunroof (Frame)
Remove headliner.
NOTE:
- Close glass slide/tilt sunroof lid.
- Move front seats backwards/downwards as far as possible.
- Remove glass slide/tilt sunroof with aid of a second person helping.
Detach all water drain hoses (1).
Disconnect plug connection from glass sunroof drive.
Release screws (1) and remove glass sunroof frame (2).
Installation:
6AZ Cassette to body
M6 x 14 ........................................................................................................................................................................................................... 5.2 Nm
NOTE:
- In production, the screws (1) are secured with the washers (2) by robots.
- In hand assembly, the washers (2) are not fitted.
__________________________________________________________
Sunroof / Moonroof: Service and Repair
Removing and Installing / Replacing Wind Deflector For Glass Sliding/Tilting Sunroof
54 12 497 Removing And Installing / Replacing Wind Deflector For Glass Sliding/Tilting Sunroof
Open glass sunroof lid.
Press down wind deflector (1). Release screws (2).
Remove spring (3) on left/right and wind deflector (1).
Installation:
Tightening torque. 54 12 7AZ.
Installation:
If necessary, replace faulty spring (1) and screw (2).
___________________________________________________________
Sunroof / Moonroof: Service and Repair
Removing and Installing/Replacing Water Gutter For Glass Slide/Tilt Sunroof (From 09/2001)
54 12 138 Removing And Installing/Replacing Water Gutter For Glass Slide/Tilt Sunroof (From 09/2001)
Necessary preliminary tasks:
- Remove glass sunroof lid.
Unhook lever (2) of water gutter on left/right from rail (1).
Installation:
Make sure lever (1) is correctly locked.
Pull water gutter forwards until roller (2) can be seen through opening in guide channel (3).
Lever (1):
- on right side to be pulled upwards
- on left side to be unhooked from guide channel
Installation:
Following parts of water gutter must not be missing or damaged:
1 Roller
2 Lock
3 Rubber seal
Check function.