20 Most Recent 2000 BMW Z3 - Page 6 Questions & Answers


http://www.bmwusa.com

Or call your local dealer.

2000 BMW Z3 | Answered on Jan 23, 2009


You have damaged the exhaust carbon trap most likely, you might try resetting the light and running it for a week and see if it clears itself, you may get lucky

2000 BMW Z3 | Answered on Nov 23, 2008


Mine came with Michelin Pilots. I believe this was the standard OEM for the Z3.

-bob fitzpatrick

2000 BMW Z3 | Answered on Oct 19, 2008


What symptoms are you getting when driving the car, if any at all? Sometines a loss of power can be an exhaust problem or if you find the car is revving on its own accord when ticking over this points to a sensor problem. All depends on what the problem is the price, this can actually be cheap to repair, but also expect to pay over £70 for the initial diagnostics.

Pete.

2000 BMW Z3 | Answered on Aug 30, 2008


try wheel speed sensor. the

2000 BMW Z3 | Answered on Aug 28, 2008


these car also have a pad sensor. and will cause this problem and if the breaks are thin they need replacement. that would be the cheapest fix.

2000 BMW Z3 | Answered on Aug 28, 2008


This car is actuelly equiped with 2, and it depends on what kind of connection you have. The OBD2 connector is located on the passenger side to the left of the glove box. The other connector which is a round connector is located under the hood on the drivers side next to the abs module.... It will have a round cover over it.

I’m happy to assist further over the phone at https://www.6ya.com/expert/jonathan_3a3c556b4b17d1d2

2000 BMW Z3 | Answered on Aug 21, 2008


may be cam sensors...

2000 BMW Z3 | Answered on Jul 24, 2008


You can downloading from the internet or go to a part store.

2000 BMW Z3 | Answered on Jul 02, 2008


Go to the menu than press specification and then reset specifications.

2000 BMW Z3 | Answered on Jun 29, 2008


you can get guide from many sites.. i know few
error codes/ fault codes, wiring diagrams, schematic diagrams, torque specs, engine info, switches functioning, assemble, disassembly, complete refurbish, repair, installation every single thing is covered
within seconds u can get the access and it's totally illustrative complete

BMW Z3 Cars &... | Answered on Feb 01, 2019


Hi
If you've had the tracking done when you had the track rod ends done and it's still pulling to the left I would check your tyre pressures 1st then look at the tyre on the left of your vehicle if its misshaped this could cause pulling
Hope this helps Nick

BMW Z3 Cars &... | Answered on Feb 14, 2018


Hi, Easy way to get over this is run a cable from working fog light to none working fog light this should then work. Only other way must be the left fog light is not earthed properly run earth wire to the vehicles body. Please give feedback at crossflowspeed@hotmail.co.uk Thanks, Malcolm Campbell.

BMW Z3 Cars &... | Answered on Sep 27, 2017


have the OBD codes read as a starting point , should point you in the right direction

BMW Z3 Cars &... | Answered on Jun 02, 2017

Not finding what you are looking for?
2000 BMW Z3 Logo

173 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2001 BMW Z3
2001 BMW Z3

136 Questions

1999 BMW Z3
1999 BMW Z3

101 Questions

Top BMW Experts

stephen Kiarie
stephen Kiarie

Level 1 Expert

32 Answers

vince

Level 3 Expert

1234 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1176 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Z3 BMW

  • Z3 BMW

Most Popular Question

2000 z3 roadster read possible

  • Cars & Trucks
Loading...