20 Most Recent 2006 Mazda Tribute - Page 6 Questions & Answers


What you need is an owner's manual. You can download one at this link for free. http://www.autousermanual.com/view/mazda/tribute/2006/a/owners-manual/

2006 Mazda... | Answered on Feb 16, 2011


I believe it is an allen key on your model!!
And it is a 3/8"

2006 Mazda... | Answered on Feb 15, 2011


I had the same problem. It was the car's main computer that had burned out. The dealer first replaced the entire shifter, but then realized it was the computer. You can pop up the little tab on the shifter console and insert your key. It will then go into gear.

2006 Mazda... | Answered on Jan 17, 2011


Does the fan turn on? If not check the fuze.

2006 Mazda... | Answered on Dec 07, 2010


The first thing you need to do is to have the abs computer scanned for codes, the abs may be related to the 4wd problem, by scanning the codes this will give you an idea of the problem, for example they scan it and it reads p1542 rt frt sensor out of spec, this would mean theres a problem with the right front speed sensor, when ever the computer sees a problem it stores a code and turns on the light for whatr ever system fails, hope this helps.

2006 Mazda... | Answered on Oct 30, 2010


Welcome to FIxYa.com


Clean throttle body with throttle body cleaner--butterfly is sticking

\


Regards, Lee Davidian


Thank you for using FixYa,com.

2006 Mazda... | Answered on Oct 28, 2010


could possibly be the tps,or the isc,have someone check both.thats's throttle postion sensor and idle speed sensor.






Tim.............

2006 Mazda... | Answered on Oct 21, 2010


I suggest that you make a test of the proper height of your lights, before you attempt an adjustment.
This can be accomplished by driving your Mazda up to within 10 FT of a blank wall.
Next take a piece of masking tape and tape it to the wall at a height of 30 inches.
Put your headlamps on - on low beam - the lights should shine on the tape.

Good luck, and let me know how you make out.

2006 Mazda... | Answered on Oct 10, 2010


its supposed to the cold air from the outside is cut off and the car starts only on pure fuel then when engine warms up engine lets outside air in its called a [choke].adrian,,,,,,

2006 Mazda... | Answered on Aug 10, 2010


the ring that sends messages to ur sensors that is machined on ur cv shaft is broke.Replace cv shaft

2006 Mazda... | Answered on Jul 26, 2010


mcdevito75 here, That is a heavy duty job even for a good, good weekend mechanic, The truth is, as you know, you can run into a dozen problems that can and will leave you haveing to tow your vehicle to the shop. First you would need the TOOLs in American and Metric sizes as both American and Metric Nuts and Bolts are included on your Mazda, Then a Hydraulic jack that can hold at least 1 corner of the Mazda off the ground and--be able to with-stand the rocking motion as you did the job, Then you"d have to be concerned with parts, suppose you get the wrong parts, suppose you find a frozen or broken part, such as a brake hose, now you would have to bleed the brake system too. It"s very smart you are willing to do your own brakes BUT EVEN WISER TO KNOW, TO MANY PROBLEMS ASSOCIATED WITH THE JOB. BEST BET, look for a sale on Brakes with-in you area, The tools, time and effort even if the job went smoothly, would cost about the same as the shop. Look for a sale, and have the shop do your brakes.

2006 Mazda... | Answered on Jul 22, 2010

Not finding what you are looking for?
2006 Mazda Tribute Logo

274 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Mazda Experts

Marvin
Marvin

Level 3 Expert

85161 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Tribute Mazda

  • Tribute Mazda

Most Popular Question

missfire cylinder 2

  • Cars & Trucks
Loading...