20 Most Recent
2008 Hummer H2 - Page 7 Questions & Answers
Has little power. I've changed
I would pull the fuel filter loacted on the frame and blow through it. If it has any resistance, it is plugged and this is the cause of your problems. Let me know what you find.
What does engine block signal mean on dashboard
That is the check engine light. It has come on to tell you there is a problem with the computer, computer controlled device, sensor, or system the computer monitors.
You bestbet it to check for codes. Once you know them you will have a much better idea of what's going on.
Let me know if you have any questions and I'll do my best to answer them. Thank you for using FixYa.com! I’m happy to assist further over the phone at
https://www.6ya.com/expert/jeremy_d728a59f986299fa
How to adjust the driver seat of a 2006 hummer h2 after it turns off
You must remove the seat from the truck, then remove the drive motors that control the adjustment you wish to make, then set the seat to where you want it and reinstall the drive motors. There is no other way. I would suggest you try and fix the problem with the seat, often it is just the switch that is bad. Please rate my Help for Fixya, it is all i ask for my time and effort to assist you. Thanks
HOT TRANSMISSION LIGHT FLASHING
When this warning light flashes it means the fluid (ATF) temperature of the transmission have reached a level that is detrimental to the operation of the transmission and damage will occur if the cause is not corrected. The causes can be overloading (towing) the vehicle, severe operational circumstances such as high air temps. Other common causes are excessive slippage of the transmission due to worn clutch packs or a defective torque converter. Also the TFT (trans fluid temperature sensor) can malfunction and send a false signal to transmission control module (TCM) and set the warning light. I would not ignore this warning, have it checked by a transmission shop or the dealer.
Not finding what you are looking for?