20 Most Recent 2008 Saturn Vue Hybrid - Page 4 Questions & Answers

On this website you find fuse box diagram and description for Saturn VUE (2005 - 2007) Saturn VUE 2005 2007 fuse box diagram Auto Genius

Bad ground or power connector at the battery or fuse box ?!

You have 2/4/6 timing marks 180 degress out on exhaust or intake cam . Did your special tool ? Rotate the crankshaft using the J 42098 until the #1 cylinder is at 60 degrees before top dead center (BTDC). Install theJ 42069 Crankshaft Locking Tool. Rotate the crankshaft in the engine rotational direction (clockwise) using the J 42098 until the #1 cylinder is at top dead center (TDC) and tighten the lever arm to the water pump pulley flange. Important: Ensure that the alignment of the crankshaft is not 180 degrees off. The alignment mark must align with the corresponding notches on the rear timing belt cover. Install the 1-2 and 3-4 camshaft locks, the J42069-1 Timing Belt Alignment Kit and the J42069-2. Important: Do not rotate the crankshaft if the camshafts are not locked in place with the 1-2 and 3-4 camshaft locks (J42069-1 and J42069-2). Important: Do not rotate the camshafts unless the crankshaft is at 60 degrees BTDC or the valves may contact the crankshaft. Loosen the tensioner pulley. Remove the timing belt.

Visit the on-line store, know as reliable-store, they have the repair manuals. I'm sure you will get the solution of your problem. Best Manuals

if you look under the car you can see if the frame of the car goes under the oil pan then you know you have to either lift the motor or drop the frame and if you drop the frame you better support the motor in order to remove the frame

Could be either the fuel pump or the fuel pump relay is going out!

Sorry, there isn't one. Car computes are not like home computers. On star can be scanned for problems. Code readers won't read them.