20 Most Recent 2007 Mercury Mountaineer - Page 3 Questions & Answers

check the clips on the mount and mirror if broken or missing can order replacement or glue/silicone back in place if clips are good line it up and press in place

Fuel pump relay, turning the ignition on runs the fuel pump for about two seconds to pressure the fuel rail to start, then the fuel pump relay takes over once engine is started, it relies on a signal from the ignition or ECU (to say keep running). Either the relay has gone down or the relay has lost the signal. Don't bypass the relay, it's a safety feature, to stop the fuel pump if a fuel line ruptures.

See there were several postings. Was internal fuel tank screen good when pump was changed? Was disposable fuel filter changed? I had similar problems and it turned out that the internal filter screen broke apart and clogged the fuel lines. The crankshaft sensor was also bad as fuel pump was tested during internal tank filter work. Also check your injector wires. Even having fuel pressure is nothing if the injectors are not opening to let fuel into the cylinders.

Ride Stablity Control

yes adjust the cable where it mounts to colomn