2008 Audi Q7 - Answered Questions & Fixed issues
Side Assist System Fault ! I have been having a
Hi there's this website something like reliable-store and it is very amazing for manual for repairing servicing anything
someone on fixya recommended it to me and I thank him even today
They have full manuals and it's verrrrry cheap and mine
I got free in offers
3rd time I bought it, I also had an issue with the file so the girl replaced it in 30 mins
there is one website more but i don't remember its name it was 2 years back bitman something link this
Try these out brother
4/8/2023 2:26:41 AM •
2008 Audi Q7
•
Answered
on Apr 08, 2023
•
9,991 views
Where is the injector relay for a 2008 Audi Q7 3.0 TDI?
Question edited for clarity, year make model.
Question moved to Audi Q7.
Audi Q7 (4L; 2007-2015) fuses and relays
https://fuse-box.info > audi > audi-q7-4l-2007-2015-fu...
Here you will find fuse box diagrams of Audi Q7 2007, 2008, 2009, 2010, ... Assignment of the fuses and relays in the engine compartment (diesel engine) ...
Fuse box diagram Audi Q7 and relay with assignment and ...
https://fuseandrelay.com > audi > q7
Description of fuse boxes and relays Audi Q7, their locations and diagrams. ... V12 TDI: Coolant circulation relay after off. engine -J151- (V6 FSI from ...
Passenger compartment ·
Front right fuse box ·
Relay and fuse box in the...
Fuses and relay Audi Q7
https://fusesdiagram.com > audi > fuses-and-relay-audi-...
For the Audi Q7 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015 model year. Cigarette lighter fuse - (fuse box in Right cockp it : fuse panel, fuse ? ...
2/9/2022 12:10:54 AM •
2008 Audi Q7
•
Answered
on Feb 09, 2022
•
521 views
Where can I find navigation module
Do you mean where the data for your MMI sat nav is stored. On 2008 model probably is the boot/trunk of the car. There is a DVD player unit which stores the maps. Its on the left hand side as you look in the boot in the Audi A6 2008 (you can pull the left hand carpeted panel section off
8/29/2014 8:13:20 AM •
2008 Audi Q7
•
Answered
on Aug 29, 2014
•
45 views
Why turning light does not work on 2008 q7
the light is burnt or socket damaged or even a fuse could be burnt does it work with the parking lights on and does the flasher flash faster then before when it worked just change the bulb
5/8/2014 2:20:01 AM •
2008 Audi Q7
•
Answered
on May 08, 2014
•
203 views
Unlock child lock
On the Audi Q7, depending on country and options the child lock is either:1. On the drivers armrest, near the window switches, there are 2 buttons with a little orange light and a picture of a little baby on them. Deselect both buttons to turn off the child locks.-OR-2. Open the passenger doors, there is a small keyhole on the inside of the door above the latch, use your key and turn it 90 degrees to turn off the child lock.Hope that helps
9/25/2013 6:12:47 PM •
2008 Audi Q7
•
Answered
on Sep 25, 2013
•
1,316 views
Oil filter location Audi Q7 3.6
- When removing the plastic belly pans, don't assume all the fastener
bolts are the same. They're all torx but there are actually three
types...one type is obviously unique because it has grey bolt heads with
washers. The other two types are black pan-head bolts. But of the black
pan-head bolts there are two thread types so it helps if you can keep
track of the few that are different (I drove myself crazy when I thought
they were all the same because they wouldn't fit). The grey and black
bolts are different torx sizes too, though I didn't think to make note
of what the sizes were.
- A 6mm hex bit or allen wrench is needed to drain the oil out of the filter assembly.
- A 36mm socket is necessary to remove the fluted cup that holds the oil
filter. Also really helps to have a long extension (e.g. 10") for the
socket wrench. There's a high-pressure hose that partially blocks access
to getting the big socket on the filter cup, but it can be gently
pressed out of the way. Be careful though, it could be easily knicked or
damaged if you get too rough with it.
- The filter and cup that holds it are snapped together and apparently
have to come out together. Unfortunately, the unit won't come out
straight down after you've unscrewed it because there's not enough space
for it to fit. I had to snake it out by moving it forward through the
engine compartment. Very frustrating. Also, I found that the job of
getting the filter out was really messy so be prepared by wearing old
work clothes or whatever. Even after draining the oil out of the filter
assembly with the filter drain plug, there is still oil left in the cup,
so when you manuever it out of the engine it spills quite a bit.
- The drain plug on the oil pan is 19mm but there's not enough clearance
to get a socket on it so I had to use a box-end wrench (open-end wrench
would obviously work too).
That's about it, otherwise it's straightforward as you'd expect an oil
change to be. If I think of anything else I'll add it later.
9/23/2011 2:33:37 PM •
2008 Audi Q7
•
Answered
on Sep 23, 2011
•
1,655 views
Not finding what you are looking for?